D Connecting the monitor
Before connecting the monitor, make sure the unit is turned off.
Video cord (not supplied) | VIDEO OUT |
Or
AV2-INPUT
Rear side
KV-MR9010
E Connecting the external amplifier
You can connect amplifier to upgrade your car stereo system.
•Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
•Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.
Rear speakers
Remote lead |
JVC Amplifier
Remote lead (Blue with white stripe)
To the remote lead of other equipment or auto antenna if any
Signal cord (not supplied for this unit)
Front speakers
*3 Firmly attach the ground wire to the metallic body or to the chassis of the
F Connecting the external components
JVC CD changer
• Refer also to page 15 of the
INSTRUCTIONS.
JVC CD changer
*4 Connecting cord supplied for your CD changer
CAUTION :
• Before connecting the CD changer, make sure that the unit is turned off.
External component
Set external input to “EXT IN” (see page 24 of the INSTRUCTIONS).
Signal cord (not supplied for this unit)
Signal cord (not supplied for this unit)
LINE IN
External component
External component
CD changer jack
*5 Line Input Adapter
4