Prepare the Pedestal, Level the Washer

GE SPBD880 Prepare the Pedestal, Level the Washer, Reinstall the Drawer, Remove Shipping Screws

Installation Instructions

2PREPARE THE PEDESTAL

A	Pull the	Connectors
	drawer out
	as far as it
	will go.
B	Remove
	the screws
	from the
	drawer
	slides. Detach the wiring connector and the
	hose connector at the back of the drawer.
	Slide the drawer out of the base and set aside.

CRemove the screws from the service panels at the rear of the pedestal and place the panels within the pedestal.

Remove screws from service panels

3INSTALL THE PEDESTAL TO THE WASHER

APlace the pedestal against the bottom

of the unit. Check to be sure the drawer front is at the front of the unit.

BAlign the holes in the pedestal with the holes in the bottom of the unit. Use a Phillips screwdriver to install the 4 screws through the front of the pedestal and through the rear panels and into the unit—do not tighten.

CSlide the pedestal toward the unit, until it is aligned front to back. Use an 8 mm socket wrench to securely tighten the screws.

DReplace the service panels on the back and tighten the screws.

4LEVEL THE WASHER

AStand the washer upright. Move it close to its final location.

BMake sure that the washer is level by placing a spirit level on top. Check side to side and front to back.

CUse an open-ended wrench to adjust

the legs in and out. Tighten the locknut against the bottom of the pedestal.

NOTES:

•To minimize vibration, the locking nuts must be tight.

•To reduce vibration, ensure that all four rubber leveling legs are firmly touching the floor. Push and pull on the back right and then back left of your washer.

5REINSTALL THE DRAWER

ACheck to be

sure the slides Connectors are closed.

B Slide the drawer into the opening.

Align the drawer

supports to

the slides on each side.

COpen the drawer fully. Reattach the hose connector and wiring connector at the rear of the drawer. Make sure both connections are secure.

DReinstall the original screws into each drawer slide. Tighten both screws. The drawer should slide smoothly when you push it closed.

6REMOVE SHIPPING SCREWS

Remove the 4 shipping screws, plastic support tubes and rubber grommets on the back side of the washer.

SPBD880 specifications

The GE SPBD880 is an innovative and advanced circuit breaker designed to meet the demands of modern electrical systems. With a strong focus on safety, reliability, and efficiency, this model stands out in the market.

One of the main features of the SPBD880 is its ability to provide exceptional protection against overload and short-circuit conditions. This is essential in preventing damage to electrical equipment and ensuring the safety of personnel. The SPBD880 employs thermal-magnetic trip units, which combine both thermal and magnetic operating principles. This dual functionality allows for precise control and rapid response to abnormal conditions, enhancing the overall safety of the electrical system.

In addition to its robust protection mechanisms, the SPBD880 is designed for ease of use and installation. With a compact design, the breaker can fit into tight spaces, making it suitable for various applications, including industrial and commercial environments. The intuitive mounting system simplifies the installation process, reducing labor costs and installation time.

The SPBD880 also features advanced communication capabilities. It is equipped with integrated metering and monitoring technologies, allowing for real-time data collection on energy usage and system performance. This data can be invaluable for predictive maintenance practices and optimizing energy consumption, leading to reduced operational costs.

Another notable characteristic of the SPBD880 is its adaptability. It can be configured to accommodate varying system requirements, ensuring that it meets specific application needs. Whether in a standalone setup or part of a larger automated electrical system, the SPBD880 can seamlessly integrate with other devices to enhance functionality.

The environmentally friendly design of the GE SPBD880 ensures minimal impact during manufacturing and implementation. With a focus on sustainability, it utilizes materials and technologies that reduce the overall carbon footprint.

In summary, the GE SPBD880 circuit breaker combines advanced safety features, ease of use, and adaptability, making it an excellent choice for modern electrical installations. Its innovative design not only enhances protection but also promotes efficiency and sustainability, positioning it as a vital component in both industrial and commercial settings. As electrical systems evolve, the SPBD880 offers the reliability and performance needed to keep pace with technological advancements.