Maytag MDE 9701, MDE 9801 manual Unscrew the nut while holding the fan, Cleaning the FAN

Page 17

CLEANING THE FAN

The fan should be cleaned at least once a year. If you have any household pets the fan must be cleaned more often.

1. Turn off the main power switch.

2. Remove the lower cover.

3. Remove the safety screw (1). Prise out the

four clips in the

 

 

order shown

3

2

and remove the

 

 

fan cover.

 

 

 

5

4

 

 

1

6. Put the fan back into place and screw on the nut.

7. Refit the fan cover, making sure the clips hold the cover in place. Don’t forget to fit the safety screw.

8. Fit the lower cover back in place.

4. Unscrew the nut while holding the fan.

22

2

1

5. Take out the fan and clean it with a brush and water.

17

Image 17
Contents Maytag Contents Do not TUMBLE-DRY Before Tumble Drying the First TimeRead the Operating Instructions Safety Instructions Child Lock on Button CHILDREN’S SafetyParts of the Tumble Dryer Option Buttons PanelSPIN-DRIED? Before Tumble DryingRecommended Washing Marking Sorting FabricsOptions ProgrammesDrying Time Temperature1SORT Fabrics Tumble DRYSelect a Programme 5SET the Time for AIR Fluff and Timed DRY Programmes7START the Drying Programme with Button Delayed start8DRYING Programme Ended During the Drying Programme 9AFTER Tumble Drying TIPProgramme Time Consumption ValuesCleaning the Lint Filter Care and CleaningCleaning the Outside of the Machine Emptying the Condensation Water Contai NERUnscrew the nut while holding the fan Cleaning the FANCleaning the Condenser This page has been left blank for technical printing reasons Machine will not Start Trouble ShootingOverheating Protection Excessive Drying TimeNormal Indications on the Display Fault Indications on the DisplayThis page has been left blank for technical printing reasons Standard Tests Technical DataTechnical Information This page has been left blank for technical printing reasons Guarantee Service and GuaranteeService Door Quick GuideChapter Index