5START TUMBLE DRYING
Press the 
button.
The text 
at the lower edge of the display indicates that the programme has star- ted. The text field of the display shows the cur- rent stage of the programme while it is in pro- gress.
NOTE
If the child lock is on, the 
button must be held down for 3 seconds in order for the programme to start. See Chapter 3, Child safe- ty, for details of how to switch the child lock on and off.
Remaining drying time
The approximate remaining drying time is esti- mated within four minutes of the start of the drying programme. Only the time for the Ti- med dry programme and Air fluff programme is indicated for venting dryers.
The time is shown in hours and minutes (al- ternating) at the bottom right of the display
together with the 
symbol. Note that the time also includes cooling.
DURING TUMBLE DRYING
Putting in more washing
Open the door and the drum will stop automatically. To restart: Close the door and
press the 
button.
Changing programme
Press the 
button for three seconds. The programme will then be zero set and you can choose a new programme.
6DRYING PROGRAMME ENDED
The text 
on the bottom edge of the display indicates that the programme has
ended.
If the
When the programme ends:
•Clean the lint filter after each drying opera- tion, see below. An error message will be dis- played if the lint filter needs to be cleaned.
•Empty the condensation water container.
WARNING!
If the lint filter becomes completely clogged the overheat protection device may trigger. The device must then be reset to enable the machi- ne to be started, see Chapter 12, Trouble shoo- ting.
13