Maytag MDE 9901 manual Create Your OWN Drying Programme, Tip, Interrupt Input

Page 19

CREATE YOUR OWN DRYING PROGRAMME

1.Press one of the buttons P1 - P4 under which you wish to store your programme. You can select any button you like if you only want to make a temporary programme.

2.Index forward with the Menu button to the first setting or option that you wish to change. If the child lock is activated, nothing will hap- pen. Hold down the button for 3 seconds, and then press as usual.

All the programme types, settings and options are described in the table alongside.

Select Program Extra dry

< Next >

3.If you wish to change a setting, you should

index forward or back with the but- tons until the desired setting appears in the dis- play.

Select Program Timed dry progr.

< Next >

4.Then index further with the Menu button to the next setting/option, and change it in the same way if required.

5.Index further and make changes in the same way until the finished programme appears in the display together with any options. The text Stop will be displayed on the bottom line.

Timed dry

r

Time

Normal cooling

60

Temperature

low

 

Stop

 

You can now use the programme without sto- ring it (temporary programme). Press the button to start the programme.

Store the programme

If you wish to store the programme for use whenever you intend to use the tumble dryer, press the Enter button before starting. The but- ton selected by you originally (P1-P4) will ap- pear at the bottom left of the display.

You can now select the programme by pres- sing the button chosen by you in Step 1.

NOTE

The Delayed start option is not stored perma- nently.

IMPORTANT

If you store a programme by mistake, you can reset it to its settings at the time of delivery; see Reset programme later in this Chapter.

TIP

If you do not wish to index through all the settings, you can terminate the input by pres- sing the Enter button ONCE. To store the pro- gramme, you must then press the Enter button once more.

INTERRUPT INPUT

If you change your mind and wish to interrupt the input sequence, you should switch off the

dryer with the main power switch . When you switch it on again, you can start from the beginning or select one of the pre-set program- mes as usual.

19

Image 19
Contents Maytag Contents Read the Operating Instructions Before Tumble Drying the First TimeDo not TUMBLE-DRY Safety Instructions Do not allow children to play with the tumble dryer CHILDREN’S SafetyThis page has been left blank for technical printing reasons Parts of the Tumble Dryer LC-DISPLAY PanelSorting Fabrics Before Tumble DryingSPIN-DRIED? Recommended Washing MarkingOptions ProgrammesDrying Time TemperatureSort Fabrics Settings of the Four PRE-SET ProgrammesTumble DRY Tumble Drying with Easy ControlDuring Tumble Drying 5START Tumble Drying6DRYING Programme Ended After Tumble Drying Cleaning the Lint FilterNER HintDelayed Start 1-24 Hours Consumption Values PRE-SET Drying Programmes Making OWN Drying Programmes Available Programme Types Available Settings and OptionsTIP Create Your OWN Drying ProgrammeInterrupt Input Reset Programme Select Buzzer Menu System for Changing a Preset ProgramThis page has been left blank for technical printing reasons Cleaning the Outside of the Machine Care and CleaningEmptying the Condensation Water Contai NER Cleaning the FAN Cleaning the Condenser No Interior Lighting Trouble ShootingMachine will not Start Overheating ProtectionWrong Language on the Display Fault IndicationsStop Flashes in the Display Technical Information Technical DataStandard Tests Service Service and GuaranteeGuarantee Chapter IndexSET Quick Guide