11 CARE AND CLEANING
CLEANING THE LINT FILTER
Clean the lint filter after each tumble drying operation.
If your water is very hard a deposit of lime may be formed on the filter. Check when clea- ning lint from the filter if there is any sign of lime, if so wash the lint filter by hand to remove any deposits.
1.Grasp the filter handle
and pull towards you.
2. Pull the filter up out of the hol- der.
2
1
3.Open the filter and remove fluff from all sides of the filter by hand. Use a soft dry cloth to remove any remaining fluff.
4. Replace the filter in the filter holder.
If limescale develops on the filter, rinse it in water to remove the limescale.
Dry the filter thoroughly with a hand towel.
EMPTYING THE CONDENSATION WATER CONTAI-
NER
Empty the condensation water container after each tumble drying.
Pull out the condensation water container, empty the water and put
the container back.
If the container becomes too full, the pro- gramme will be interrupted and an error messa- ge will be displayed in the text field. Empty the
container and press the 
button and the programme will continue from where it was in- terrupted, see also Chapter 12, Trouble shoo- ting, heading Error messages.
NOTE
Do not pull out the condensation water contai- ner while the machine is running.
CLEANING THE OUTSIDE OF THE MACHINE
Use a mild detergent to clean the outside of the machine. Do not use any solvents, they can da- mage the machine. Do not spray the machine with water.
NOTE
Do not allow dust to accumulate round the machine. Keep clean and cool around the tum- ble dryer. Dust, heat and moisture prolong the drying time.
23