JVC KD-SC500 Radio Operations, Listening to the radio, Searching a station manually Manual search

ENGLISH

RADIO OPERATIONS

7

Listening to the radio	To stop searching before a station is
	received, press the same button you have

You can use either automatic searching or manual searching to tune in to a particular station.

pressed for searching.

Searching a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM 1 FM 2 FM 3 A M

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

Selected band appears.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Start searching for a station.

To search stations of higher frequencies

Searching a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM 1 FM 2 FM 3 A M

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display.

To search stations of lower frequencies

When a station is received, searching stops.

10