BASIC OPERATIONS
|
| 7 |
1 | 3 | 2 |
ENGLISH
Turning on the power
1 Turn on the power.
Volume level indicator
Note on | Volume level appears. |
When you select a source in step 2 below, the
power automatically comes on. You do not have 4 Adjust the sound as you want. (See to press this button to turn on the power.
pages 23 and 24.)
2 Select the source.
(For | (For |
To operate the tuner (FM or AM), see pages 10 – 12.
To play a CD,
see pages 13 – 16. To play an MP3/WMA disc,
see pages 18 – 22.
To operate the CD changer (only for
To operate the external component (only for
see page 37.
To drop the volume in a moment
Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
To turn off the power
Press and hold for more than one second.
“SEE YOU” appears, then the unit turns off.
•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
3 Adjust the volume.
To increase the volume
To decrease the volume
CAUTION on Volume Setting:
Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.
7