Venting Requirements

VENTING

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling, attic, crawlspace, or a concealed space of a building. Only rigid or flexible metal vent shall be used for exhausting.

If using an existing vent system

■Clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint.

■Replace any plastic or metal foil vent with rigid or flexible heavy metal vent.

■Review vent system chart. Modify existing vent system if necessary to achieve the best drying performance.

If this is a new vent system

Vent material

■Use a heavy metal vent. Do not use plastic or metal foil vent.

■4" (102 mm) heavy metal exhaust vent and clamps must be used.

102 mm

4" (102 mm) heavy metal exhaust vent

Vent products can be purchased from your dealer or by calling Whirlpool Service. For more information, see the “Assistance or Service” section in your Use and Care Guide.

Rigid metal vent

■For best drying performance, rigid metal vents are recommended.

■Rigid metal vent is recommended to avoid crushing and kinking.

Flexible metal vent

■Flexible metal vents are acceptable only if accessible for cleaning.

■Flexible metal vent must be fully extended and supported when the dryer is in its final location.

■Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance.

■Do not install flexible metal vent in enclosed walls, ceilings, or floors.

■The total length of flexible metal vent should not exceed 7¾ ft. (2.4 m).

Elbows

45° elbows provide better airflow than 90° elbows.

GoodBetter

Clamps

■Use clamps to seal all joints.

■Exhaust vent must not be connected or secured with screws or other fastening devices that extend into the interior of the duct and catch lint. Do not use duct tape.

Clamp

Exhaust

	4"	C
A	4"
A	(102 mm)
4"
(102 mm)		2½"
4"		(64 mm)
4"
(102 mm)
Recommended:	Acceptable:
A. Louvered hood style	C. Angled hood style
B. Box hood style

■An exhaust hood should cap the vent to keep rodents and insects from entering the home.

■Exhaust hood must be at least 12" (305 mm) from the ground or any object that may be in the path of the exhaust (such as flowers, rocks or bushes, snow line, etc.).

■Do not use an exhaust hood with a magnetic latch.

W10267633A specifications

The Maytag W10267633A is a highly regarded appliance that exemplifies quality and durability in everyday home use. Designed for busy households, this model is a top-loading washing machine that seamlessly integrates functionality with convenience. Aimed at providing thorough cleaning performance, the W10267633A is equipped with a variety of features that enhance user experience and efficiency.

One of the main highlights of the Maytag W10267633A is its powerful Agitator system. This traditional mechanism is rooted in effective cleaning, enabling a robust wash action that agitates clothes for optimal dirt removal. Paired with the machine’s large capacity, which allows for bigger loads, users can tackle laundry days much more efficiently.

Another significant feature of this model is its Adaptive Wash Technology. This feature automatically senses the size of the load and adjusts water levels accordingly. Through this innovation, the washing machine conserves water while ensuring that each load is thoroughly cleaned, regardless of size.

In terms of cycle options, the Maytag W10267633A doesn't disappoint. It offers multiple wash cycles, including options for heavy-duty, delicate, and quick wash settings. This versatility allows users to customize their washing experience based on the fabric types and soil levels, making it a versatile addition to any laundry room.

The machine also prioritizes energy efficiency, meeting the standards set by the Energy Star program. This not only translates to potential savings on utility bills but also contributes to a more sustainable household. The durability of the appliance is bolstered by its stainless steel tub, which resists chipping and snagging, ensuring that clothes remain in good condition over time.

For added convenience, the Maytag W10267633A is designed with a user-friendly control panel, making it easy to choose cycles and adjust settings. Additionally, the machine is built with a solid foundation that minimizes vibration during operation, leading to a quieter washing experience.

Overall, the Maytag W10267633A is a dependable washing machine that pairs robust cleaning capabilities with modern technology and user-oriented features. Its smart design, efficient energy consumption, and versatility make it an excellent choice for families who value both performance and convenience in their laundry appliances.