Maytag W10267633A Reverse Door Swing, Reverse the strike, Reinstall the door

Page 14

All Models:

13.Select a Timed Dry heated cycle, and start the dryer. Do not select the Air Only Temperature setting.

If the dryer will not start, check the following:

■Controls are set in a running or “On” position.

■Start button has been pushed firmly.

■Dryer is plugged into an outlet and/or electrical supply is connected.

■Household fuse is intact and tight, or circuit breaker has not tripped.

■Dryer door is closed.

This dryer automatically runs an installation diagnostic routine at the start of its first cycle.

If you receive an L2 code, there may be a problem with your home power supply keeping the dryer’s heater from turning on. See “Troubleshooting.”

If you receive an AF code, your dryer vent may be crushed or blocked. See “Troubleshooting.”

NOTE: You may notice an odor when the dryer is first heated. This odor is common when the heating element is first used. The odor will go away.

REVERSE DOOR SWING

You can change your door swing from a right-side opening to a left-side opening, if desired.

1.Place a towel or soft cloth on top of dryer or work space to avoid damaging the surface.

Remove the door assembly

1.Open the dryer door.

2.Remove the bottom screw from each of the 2 hinges that attach dryer door to front panel of dryer.

3.Loosen the top screw from each of the 2 hinges in Step 2.

A

B

A

B

A. Loosen these screws.

B. Remove these screws.

4.Remove the dryer door and the hinges by lifting upward on the door. Lay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel.

5.Remove the 4 plastic plugs located outside the dryer door opening.

6.Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed in Step 4.

Reverse the strike

1.Remove the door strike from the dryer door opening.

2.Remove the cosmetic screw opposite the door strike.

A B

A. Door strike

B. Cosmetic screw

3.Reinstall the door strike and cosmetic screw on the opposite side of the dryer door opening from where they were removed.

NOTE: Door strike and plugs must be on the same side of the dryer door opening.

Reinstall the door

1.Remove the 4 screws and 2 hinges from the dryer door.

2.Replace the 4 screws in the same holes.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Table of Contents Dryer SafetyOptional Equipment Installation RequirementsTools and Parts Parts suppliedLocation Requirements It is your responsibility Electric Dryer Power HookupElectrical Requirements Electrical ConnectionInstall strain relief Style 1 Power supply cord strain reliefStyle 2 Direct wire strain relief Electrical ConnectionWire connection Power supply cord If your home has You will be Go to Section Connecting toWire connection Direct wire Remove center, silver-colored terminal block screwBDE CG F Optional 3-wire connection Venting Requirements If using an existing vent systemVenting If this is a new vent system Vent materialSpecial provisions for mobile home installations Optional exhaust installationsAlternate installations for close clearances Plan Vent SystemConnect Vent Install Leveling LegsInstall Vent System Connect Inlet Hose Steam ModelsSteam Models Only Complete InstallationLevel Dryer Reverse the strike Reinstall the doorReverse Door Swing No heat Dryer will not run TroubleshootingDryer Operation Dryer displaying code messageDryer Results

W10267633A specifications

The Maytag W10267633A is a highly regarded appliance that exemplifies quality and durability in everyday home use. Designed for busy households, this model is a top-loading washing machine that seamlessly integrates functionality with convenience. Aimed at providing thorough cleaning performance, the W10267633A is equipped with a variety of features that enhance user experience and efficiency.

One of the main highlights of the Maytag W10267633A is its powerful Agitator system. This traditional mechanism is rooted in effective cleaning, enabling a robust wash action that agitates clothes for optimal dirt removal. Paired with the machine’s large capacity, which allows for bigger loads, users can tackle laundry days much more efficiently.

Another significant feature of this model is its Adaptive Wash Technology. This feature automatically senses the size of the load and adjusts water levels accordingly. Through this innovation, the washing machine conserves water while ensuring that each load is thoroughly cleaned, regardless of size.

In terms of cycle options, the Maytag W10267633A doesn't disappoint. It offers multiple wash cycles, including options for heavy-duty, delicate, and quick wash settings. This versatility allows users to customize their washing experience based on the fabric types and soil levels, making it a versatile addition to any laundry room.

The machine also prioritizes energy efficiency, meeting the standards set by the Energy Star program. This not only translates to potential savings on utility bills but also contributes to a more sustainable household. The durability of the appliance is bolstered by its stainless steel tub, which resists chipping and snagging, ensuring that clothes remain in good condition over time.

For added convenience, the Maytag W10267633A is designed with a user-friendly control panel, making it easy to choose cycles and adjust settings. Additionally, the machine is built with a solid foundation that minimizes vibration during operation, leading to a quieter washing experience.

Overall, the Maytag W10267633A is a dependable washing machine that pairs robust cleaning capabilities with modern technology and user-oriented features. Its smart design, efficient energy consumption, and versatility make it an excellent choice for families who value both performance and convenience in their laundry appliances.
Top Page Image Contents