Location Requirements

Dryer Dimensions

431/2"

(1105 mm)

		221/4"
	291/4"	(565 mm)
	(743 mm)	29"
	(743 mm)	(737 mm)
		(737 mm)

NOTE: Most installations require minimum 5" (127 mm) clearance for exhaust vent with elbow. See “Venting Requirements.”

You will need

■A location that allows proper exhaust installation. See “Venting Requirements.”

■A separate 30-amp circuit.

■If using a power supply cord, a grounded electrical outlet within 2 ft (610 mm) of either side of dryer. See “Electrical Requirements.”

■A sturdy floor to support total dryer weight of 200 lbs. (90.7 kg). Also consider combined weight of a companion appliance.

■A level floor with maximum slope of 1" (25 mm) under entire dryer. If slope is greater than 1" (25 mm), install Extended Dryer Feet Kit, Part Number 279810. Clothes may not tumble properly and automatic sensor cycles may not operate correctly if dryer is not level.

■For a garage installation, place dryer at least 18" (457 mm) above floor. If using a pedestal, you will need 18" (457 mm) to bottom of dryer.

■Steam models only: Cold water faucets located within 4 ft. (1.2 m) of dryer, and water pressure of 20-100 psi (137.9-689.6 kPa). Cold water supply may come from washer using “Y” connector provided.

Do not operate your dryer at temperatures below 45ºF (7ºC). At lower temperatures, the dryer may not shut off at the end of an automatic sensor cycle, possibly resulting in longer drying times.

Do not install or store dryer where it will be exposed to water and/or weather.

Check code requirements. Some codes limit, or do not permit, installation of dryer in garages, closets, mobile homes, or sleeping quarters. Contact your local building inspector.

Installation clearances

Location must be large enough to allow dryer door to open fully.

Installation spacing for recessed area or closet installation

The following spacing dimensions are recommended for this dryer. Dryer has been tested for spacing of 0" (0 mm) clearance on sides and rear. Consider recommended spacing for following reasons:

■Consider additional spacing for ease of installation and service.

■May need additional clearance for wall, door, and floor moldings.

■Consider additional spacing on all sides of dryer to reduce noise transfer.

■For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Equivalent ventilation openings in louvered doors are acceptable.

■Consider spacing for companion appliance.

■Additional space required for rear exhaust of dryer to right or left.

			14" máx.*
			(356 mm)	48" 2*
18"*				(310 cm2)	3"*
18"*					(76 mm)
(457 mm)					(76 mm)
(457 mm)
					3"*
				24" 2*	(76 mm)
				24" 2*
				(155 cm2)
1"	29"	1"	291/4"	5"
(25 mm)	29"	(25 mm)	291/4"	(127 mm)
(25 mm)	(737 mm)	(25 mm)	(743 mm)	(127 mm)

Recessed	Side view- closet	Closet door with
area	or confined area	vents
		vents

*Required spacing

Mobile home - Additional installation requirements

Dryer is suitable for mobile home installations. Installation must conform to Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or Standard CAN/ CSA-Z240 MH.

Mobile home installations require:

■Metal exhaust system hardware, available for purchase from your dealer.

■Special provisions must be made in mobile homes to introduce outside air into dryer. Openings (such as a nearby window) should be at least twice as large as dryer exhaust opening.

W10267633A specifications

The Maytag W10267633A is a highly regarded appliance that exemplifies quality and durability in everyday home use. Designed for busy households, this model is a top-loading washing machine that seamlessly integrates functionality with convenience. Aimed at providing thorough cleaning performance, the W10267633A is equipped with a variety of features that enhance user experience and efficiency.

One of the main highlights of the Maytag W10267633A is its powerful Agitator system. This traditional mechanism is rooted in effective cleaning, enabling a robust wash action that agitates clothes for optimal dirt removal. Paired with the machine’s large capacity, which allows for bigger loads, users can tackle laundry days much more efficiently.

Another significant feature of this model is its Adaptive Wash Technology. This feature automatically senses the size of the load and adjusts water levels accordingly. Through this innovation, the washing machine conserves water while ensuring that each load is thoroughly cleaned, regardless of size.

In terms of cycle options, the Maytag W10267633A doesn't disappoint. It offers multiple wash cycles, including options for heavy-duty, delicate, and quick wash settings. This versatility allows users to customize their washing experience based on the fabric types and soil levels, making it a versatile addition to any laundry room.

The machine also prioritizes energy efficiency, meeting the standards set by the Energy Star program. This not only translates to potential savings on utility bills but also contributes to a more sustainable household. The durability of the appliance is bolstered by its stainless steel tub, which resists chipping and snagging, ensuring that clothes remain in good condition over time.

For added convenience, the Maytag W10267633A is designed with a user-friendly control panel, making it easy to choose cycles and adjust settings. Additionally, the machine is built with a solid foundation that minimizes vibration during operation, leading to a quieter washing experience.

Overall, the Maytag W10267633A is a dependable washing machine that pairs robust cleaning capabilities with modern technology and user-oriented features. Its smart design, efficient energy consumption, and versatility make it an excellent choice for families who value both performance and convenience in their laundry appliances.