Installation spacing for recessed area or closet installation
n All dimensions show recommended and minimum spacing |
allowed. |
n Additional spacing should be considered for ease of |
installation and servicing. |
n Additional clearances might be required for wall, door, floor |
Recessed or closet installation – Stacked with stack kit (Accessory):
12"
(305 mm)
moldings, and dryer venting. |
n Additional spacing should be considered on all sides of the |
dryer to reduce noise transfer. |
n For closet installation with a door, minimum ventilation |
openings in the top and bottom of the door are required. |
Louvered doors with equivalent ventilation openings are |
acceptable. |
n Companion appliance spacing should also be considered. |
Custom undercounter installation (dryer only):
3"
(76 mm)
653/4"
(1670 mm)
51/4" | 3" | |
(133 mm) | ||
(76 mm) | ||
|
48in.2
(310 cm2)
24in.2
(155 cm2)
1" 
(25 mm)
331/4"
(845 mm)
1"
(25 mm)
1"
1" (25 mm) (25 mm)
Mobile home - Additional installation requirements:
This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile home construction and Safety, Title 24, HUD Part 280).
Recessed or closet installation (dryer only):
Mobile home installations require:
18"9"min (457(229mm))
3"
(76 mm)
48in.2
(310 cm2)
nMetal exhaust system hardware, available for purchase from your dealer.
nSpecial provisions must be made in mobile homes to introduce outside air into dryer. Openings (such as a nearby window) should be at least twice as large as dryer exhaust opening.
3" | 3" | |
(76 mm) | ||
(76 mm) | ||
|
1"
1" (25 mm) (25 mm)
24in.2
(155 cm2)
11