■2. Press the MD 38 button and then 7 button to set the function to MD.
The track numbers and total playback time are displayed.
■3. Press the EDIT/TITLE button until "ERASE ?" is displayed.
The "EDIT" indicator appears on the display.
DIVIDE=JOIN=MOVE=ERASE =ALL ERASE=DISC TITLE=TITLE=(Back to the beginning)
■4. Press the SET button.
Track to be erased
■5. Select the track number to be erased.
To select the track number, press the UP, DOWN, >, or < but- ton. (For details, see step 5 in "Dividing Tracks (DIVIDE Func- tion)".)
■6. Press the SET button.
Alternates
SET
■7. Press the EDIT/TITLE button.
The selected track is erased and the track numbers in the music calender decreases by 1.
Then the “EDIT” indicator disappears on the display.
■8. Press the MD 0 button to complete editing.
The MD is ejected after “UTOCwriting” is displayed.
•You can also complete editing operation by pressing
the 
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4, 5, or 6 until the display returns to the original display before editing the track.
Note: While “UTOCwriting” is displayed, do not disconnect the power cord or subject the Unit to the vibration to avoid in- correct recording.
Erasing all the Tracks (ALL ERASE Function)
■Use the Remote Control to carry out this function.
■1. Insert an MD to be edited with its label side up.
■2. Press the MD 38 button and then 7 button to set the function to MD.
■ |
| |
5. Press the EDIT/TITLE button. | English | |
All the tracks in the MD are erased and “BLANK DISC” is kept | ||
| ||
displayed. |
| |
The "EDIT" indicator disappears on the display. |
| |
To cancel the all erasing, press the CANCEL button in step 4. |
| |
To remove the MD, press the MD0 button. |
| |
Note: While “UTOCwriting” is displayed, do not disconnect the |
| |
power cord or subject the Unit to the vibration to avoid in- |
| |
correct recording. |
|
Giving Titles to MD (DISC TI- TLE/TITLE Function)
You can give a disc title to the MD and a track title to the tracks in the MD. Any title name can be given up to 32 characters using the provided character sets.
The disc title you have given will be displayed in the following cases.
•When you insert the MD while the function is set to MD.
•When you press the MD 38 button and then 7 button to set the
function to MD.
Once you have given the title to the tracks, the track title will be dis- played before playing the track.
■Since the procedure to give title is the same as for the disc title and track title except for step 4, both functions are explained to- gether here.
■Use the Remote Control to carry out these functions.
■1. Insert an MD to be edited with its label side up.
■2. Press the MD 38 button and then 7 button to set the function to MD.
The total track numbers and total playback time are displayed.
■3. Press the EDIT/TITLE button until "DISC
TITLE ?/TITLE ? (for track title)" is dis- played.
The "EDIT" indicator appears on the display.
DIVIDE=JOIN=MOVE=ERASE=ALL ERASE=DISC TITLE=TITLE=(Back to the beginning)
■4. Press the SET button.
•For DISC TITLE:
| Cursor |
Cursor | Alternates |
EDIT | |
/TITLE |
|
SET |
|
Title name area | Characters to be input |
•For TITLE (Track Title):
The track numbers and total playback time are displayed.
EDIT
Track to be given the title
■3. Press the EDIT/TITLE button until “ALL
ERASE ?” is displayed.
The "EDIT" indicator appears on the display.
DIVIDE=JOIN=MOVE=ERASE=ALL ERASE=DISC TITLE=TITLE=(Back to the beginning)
■4. Press the SET button.
Alternates
EDIT
/TITLE
SET
/TITLE
SET
1Select the track number to be given the title using the UP, DOWN, >, or < button. (For details, see step 5 in "Divid- ing Tracks (DIVIDE Function)".)
2Press the SET button.
Cursor
CursorAlternates
SET
Title name area Characters to be input
19