3 Press the "WATER LEVEL" button to select suitable water level
WATER LEVEL
After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10.
Page 10
4 Push the " PROGRAM/RESERVATION" button to select suitable reserve program
PROGRAM
RESERVATION
After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the
"PROGRAM/RESERVATION"button over 2 seconds to set a reserved wash program. Refer to The button of "PROGRAM/RESERVATION" on page 10.
Confirm the reserve program | Page 10 |
|
|
When "Reservation" becomes active, the nixie tube displays the time to the end of the reserved wash cycle, and the indicator turns on.During reserve procedure,push the
"Reservation" button to display the reserve mode.
To change the running program or cancel the reservation, you should cut off the supply and reselect.
the washing will finish about 18 hours later
5 Press the "start/pause" button
START PAUSE
Close the top lid
START PAUSE
During running , if the top cover is opened, the washing machine will stop running and alarm.
Finish washing
The washing machine cuts off the power supply automatically when wash cycle ends.
13