Haier HWM50-10B user manual Trouble shooting Answer to question

Trouble shooting Answer to question

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.

Phenomena		The reason			How to settle
Buzzing upon reservation starts,		The top lid is not closed.			Close the top lid.
Nixie tube indicates "E0".
No or slow drain, nixie tube		Is the drain hose put down?			Put down the drain hose.
					Open and close the top lid once.
indicates "E1" , buzzing.		Is the drain hose blocked
					Clean the foreign material.
		by foreign material?
					Open and close the top lid once.
Running pauses , nixie tube		The top cover leaves open.			Close the top lid.
indicates "E2", buzzing.
Safety switch actuates, not spin,		Are the laundries put			Re-order the laundries. Close the
(after self-correction twice),		slantingly?			top lid.
nixie tube displays "E3", buzzing.		Is the machine slanting?			Level the machine in right position.
					Open and close the top lid once.
No or slow water filling not		The water tap is not open			Open the water tap. Push the
		The water inlet valve is blocked			"Start/Pause" button.
reaching the level in 15min ,
					Clean the water inlet valve.
nixie tube indicates "E4",		The water pressure is too
					Push the "Start/Pause" button.
buzzing.		low and	the current is		Wait for the normal water pre-
		too small.			ssure before use.
Poor or no waterfall flow.		If the nozzle is choked with			Remove the foreign bodies.
		foreign bodies.
		Is there power failure?			Use it when the power is on.
	Not wash	Is the power plug loose?			Insert the power plug tightly.
The machine		Does the water level arrive at the			Affusion to the set water level.
		set water level?
does not act.
	Not spin	Is the power plug loose?			Insert the power plug tightly.
		Is the top lid closed?			Close the top lid.
		Are the laundries put orderly?			Put the laundries orderly.
There's abnormal sound		Is the machine slanting?			Level the machine properly.
inside the machine.		Are the laundries slanting in			Re-order the laundries.
		spinning?
The water faucet leaks.		Is the jointer screw of the water			Fasten the jointer screw
		inlet hose is loose or twisted			properly.
		awry?
Common phenomena
Phenomena				Explanation
The spinning is intermittent when it starts.				Balance the laundries to avoid slanting.
Push the "Procedure selection" button to				The program is setting the drain time. Some time is
select "Spin", but it doesn't work.				needed before it starts spinning.
There may be some water flowing out of				It is the water remained in the factory inspection of
the drain hose in the first use of the machine.				performance.
While water filling in wash and rinse, the				To prevent splash during water filling.
pulsator pauses rotation
Wash pauses				Supplementary water filling 48 s after
				sensor tests cloth material.

15