Connection between the water inlet hose and the washing machine
1.Do not take off the water absorption | Nut of the water inlet hose |
cushion. Please check if the cushion |
|
is dropped or damaged before each |
|
usage. If it happens please contact our
2.Put the nut of the water inlet hose on the valve jointer.
3.Fasten the nut. Swaying it gently to | Water absorption cushion | |
confirm if it's suitable. | ||
Jointer of the water inlet valve |
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2.Hang the lock lever to the jointer. Release the slider till a click sound is heard.
Jointer of the water
inlet hose
Locking lever 
Slider
Check the connection between the jointer of the water inlet hose and the water tap
1.Swaying the hose gently to confirm if it is fastened stable. 2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the jointer
of the water inlet hose and the water tap, and the installation of the water inlet hose are firm, so as to prevent dropping from improper Installation position.
Take down the water inlet hose
1.Close the water tap.
2.Press the locking lever. Push down the slider. Then pull off the water inlet hose. If the machine is used more than once every week, the jointer of the water inlet hose can be kept on the tap to prevent damaging the fixing screw.
Locking lever
Slider
7