How to change the direction of the drain hose
1.Dismantle the back cover of the washing machine.
2.Put down the drain hose. Take off the drain hose frame. As indicated in Figure 1, put the drain hose into the cabinet. Then stretch one hand into the cabinet to nip the claw of the drain hose bush- ing to remove the claw from original position. Take off the drain hose bush- ing with the other hand. (As indicated in Figure 2 and 3).
Outer drain hose
Drain hose frame | Drain hose bushing | ||
Figure 2 | |||
|
| ||
Figure 1 | Cabinet | ||
| |||
| Inner | Outer | |
| Press | Drain hose | |
|
| bushing | |
Drain hose |
| Take off | |
bushing claw |
|
| |
| Press | Figure 3 | |
3.Dismantle the protecting cover of the drain outlet at the other side (method the same as the bushing). Install the bushing as per indicated in Figure 4.
4.Extend the drain hose from the other side. Fix the drain hose onto the base frame with the drain hose frame. (As indicated in Figure 5)
Drain outlet protecting cover 
Drain hose bushing | Figure 5 |
| |
Figure 4 |
|
5.Install the protecting cover of the drain outlet at the other side as per indicated in Figure 6. 
Figure 6
Usage of the drain hose
The drain hose shall drain smoothly 1.The height of the drain hose shall be
less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.
2.Do not trample or press the drain hose.
If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.
4.If extra drain hose is needed, please 
make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.
5.If the extra hose is too long, cut it either at A or at B point.
5