Haier HWM55-10 user manual Safety precautions, Do not use water hotter above 50 C

Page 4

Safety precautions

Please plug the plug on special receptacle with rated voltage. Be sure to use single- phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible.

The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle, when moving the machine, or when cleaning the machine. Do not use wet hand to ins- ert or pull out the power plug.

Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully.

Do not put the machine at damp place like

Do not use water hotter above 50 C .

the bathroom. Never wash it with water.

 

Not put wet laundries on the control panel.

 

 

 

 

 

In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet.

The ventilation holes at the bottom

Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning.

soft items

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose,

do not use the plug any more.

2

Image 4
Contents Full Automatic Washing Machine with Pump 0030806972CContents Meaning and description of the symbols Injure the personal safety of the userContents marked with that symbol are actions forbidden Names of the partsSafety precautions Do not use water hotter above 50 CDismantle Install the lint filter Installation and adjustmentAdjust the installation position Usage of the drain hose How to change the direction of the drain hoseDo not tramp or press the drain hose Install the water inlet hose Take down the water inlet hosePreparation before washing Pay attention to followings before washing the laundriesPut in the laundries How to use the washing powderUsage of the detergent Procedure Selection button Use the operation buttonsDescription of the function of the buttons Program Selection buttonSTART/PAUSE button Power ON/OFF buttonReserviation button Operating procedure and explanations for the buttons Spin Water Level Selection Program SelectionSelection method of the procedure programs Push the Water Level button to Select suitable water levelClose the top lid Finish washing Time list of Each ProgramminutesDismantle & Install Disposal after washingTrouble shooting Answer to question Common phenomenaSpecifications Packing listName Quantity One piece