Install the water inlet hose
1.Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the valves can result.
2.Connect the other ends to the water inlet valve . ( As figure 2)
Jointer of the water inlet hose
Jointer of the water inlet valve
Figure 1 | Water absorption cushion | Figure 2 |
Check the connection between the jointer of the water inlet hose and the water tap
1.Swaying the hose gently to confirm if it is fastened stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection between the water inlet hose and the water tap is firm, so as to prevent dropping from improve Installation position.
Take down the water inlet hose
1.After using, Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
6