Caring For Your Dq,fer
In This Section
Paw
Dryers require regular maintenance. Follow the suggestions belovr to maintain your dryer properly.
Maintenance-every load
Cleaning the lint screen
The lint screen is located under a lid on top of the dryer. Clean it before each load. A screen blocked by lint can increase drying time.
1.Open the lid and pull the lint screen straight out.
2.Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove lint. Wet lint is hard to remove.
3.Push the lint screen firmly back into place and close the lid.
Product alid Fabric Damage Hazard
Do not run ttle dryer with the lint screen loose, dama ged, blocked or missing.
Doing so cal I cause overheating and damage to both the dryer and fabrics.
Lint signal
(on some model@
Restricted airflow reduces drying efficiency. The signal (a whistle tone) lets you know if the airflow is restricted.
lTurn off the dryer and clean the lint screen.
NOTE: Clean your lint screen before each load. Do not wait for the lint signal. The lint signal indicates excessive lint present on your lint screen. If you wait for the lint signal before you clean the lint screen, drying efficiency will be reduced.
11