Now start, Use Duct Tape, Bolts, Panelb

NOTE: If local codes require permanently connected wiring, see “Alternate electrical connection,” Panel F.

To convert to three-wire electrical system, the four-wire power supply cord must be removed and the appliance cabinet must be grounded according to local codes either by using the neutral terminal or a separate grounding wire.

(See Panel F,‘Alternate electrical connection;’ for detailed instructions.)

Exhaust reqdrements

WARNING: Potential Fire Hazard

l Metal, flexible duct may be used. Do Not use non-metallic flexible duct since it is a potential fire hazard.

l Four-Inch Metal Exhaust Duct is required.

Use Duct Tape

to seal all joints.

Exhausting the dryer outside is recommended. If

dryer cannot be exhausted outside, use Exhaust Deflector Kit LCK4500 available from your Whirlpool dealer.

Exhausting the dryer through the side of the washer/dryer requires use of Side Exhaust Kit LCK4600. Follow installation instructions with the kit for proper exhaust installation.

Mobile Home Exhaust Requirements: see Panel F, Alternate Exhaust Methods.

Metal Flexible Duct must be fully extended and supported when the dryer is in its final position. DO NOT KINK OR CRUSH THE DUCT

Exhaust Duct should end with an exhaust hood to prevent exhausted air from returning into dryer. The outlet of the hood must be at least 12 inches form the ground or any object that may be in the path of exhaust.

2Yzinch outlet Exhaust Hood should be used with short systems only. This outlet creates greater backward pressure than other hood types.

Exhaust Hoods with magnetic latches should not be used.

Maximum length of the exhaust system depends upon the type of duct used, number of elbows and type of exhaust hood. The maximum length for both rigid and flexible duct is shown in chart.

I	I	VPE
	EXHAUST HOOC	VPE	I
			I

Now start...

Use a 7/ 1&inch socket wrench

1 to remove two bolts holding n the wood pallet to the bottom

of the washer/dryer.

/	bolts	/	leg,	check	to see if
			the	other	leg	goes
			down. Check			the
			other leg in the same way. (If the
			legs don’t adjust, go through step 3

Remove pallet. Remove

n parts from plasticFind the diamond marking in the ridges of the front legs. Start to screw

the front legs into the hole in the triangular brace at the front corner of the machine. A little liquid detergent to lubricate the threads will help. Use pliers to turn the leg all the way to the diamond.

WARNING: Potential Fire Hazard

Exhaust Systems longer than specified will :

l Accumulate lint.

lShorten the life of the dryer.

l Reduce performance - cause longer drying times and increase energy usage.

The back pressure in any exhaust system used must not exceed 0.3 inches of water column. measured with an incline manometer, at the point that the exhaust duct connects the dryer.

rear leas

l4 legs

l	1 hose clamp	front legs
	1 plastic strap	front legs
l	1 plastic strap

l 4 flat, water-hose washers

l1 small clamp

Insert a rear leveling leg into the hole in the rear corner. Push the leg in until it snaps into place. Do the same thing with the other

leveling leg in the other rear corner.

Because of the weight and size of the washer/dryer, two people are required.

corner. To

prevent damaging the product do not remove corner post before cutting. Remove carton.

PANELB

3397512 specifications

The Whirlpool 3397512 is a highly regarded replacement dryer heating element designed to restore your appliance's heating capabilities effectively. It is particularly popular among homeowners looking to replace a faulty heating element in their Whirlpool dryers. This part is compatible with a wide range of dryer models, ensuring that users can benefit from the heating solution it provides.

A standout feature of the Whirlpool 3397512 is its robust construction, designed to withstand the rigors of frequent use. Made from high-quality materials, it ensures longevity and durability, minimizing the need for frequent replacements. This feature is crucial for maintaining the efficiency of your dryer over time.

One of the key technologies incorporated in the Whirlpool 3397512 is its advanced heating design, which promotes even heat distribution. This ensures that clothes are dried uniformly, preventing instances of damp spots that can occur with inferior heating elements. This technology not only enhances the drying process but also contributes to fabric care, reducing wear and tear on clothes.

The Whirlpool 3397512 is engineered for easy installation, making it accessible for DIY enthusiasts as well as casual users. The design features straightforward connections that can be made with minimal tools, allowing users to quickly restore their dryer’s functionality without the need for professional assistance.

Moreover, the efficiency of the Whirlpool 3397512 aligns with modern energy-saving standards. It operates effectively at optimal temperatures, reducing energy consumption while providing powerful drying capabilities. This efficiency can lead to lower utility bills and a smaller carbon footprint, making it an environmentally conscientious choice.

In addition, compatibility is another essential characteristic of the Whirlpool 3397512. It fits various Whirlpool dryer models, making it a versatile solution for many households. This wide compatibility ensures that when the heating element needs replacing, homeowners can easily find a suitable option without facing the hassle of extensive searches or waiting on special orders.

In conclusion, the Whirlpool 3397512 heating element is an essential component that enhances the performance of compatible Whirlpool dryers. Its robust construction, advanced heating design, ease of installation, and energy efficiency make it a preferred choice among consumers looking to maintain their dryers in optimal working condition. By choosing the Whirlpool 3397512, users can enjoy a reliable and efficient drying experience.