Haier XQB55-10H user manual Start Pause

Page 13
Page 16

SURPLUS(MIN)

To indicate -- during sensing.

To indicate remaining min. During

program running.

To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal conditions (see page 16)

"START/PAUSE"button

After the power is switched on, press it to start the machine

During working, push it to pause working. During pause, push this button to restart and continue operation.

"POWER ON/OFF"button

Press "Power On/Off" button to connect power supply.

After power is connected,pressing this button will cut off the supply.

SURPLUS MIN

RESERVE HOURS LATER

RESERVATION

CALEFACTION

START

PAUSE

POWER ON/OFF

"RESERVATION/CALEFACTION"

button

 

Press "RESERVATION/CALEFACTION"button to set scheduling or heating Function.If heating function is selected, the scheduling function is unavailable.

During machine running, the display indicates the cycle remaining time in minutes). Press "RESERVATION/CALEFACTION"button, the display will Indicate the remaining scheduled time to cycle end (in hours), the decimal point flashes to indicate the scheduled progress.

Heating function can be selected if keep pressing "RESERVATION/ CALEFACTION"Button for more than 2 s. If the temperature indicator is lighted, it means heatingfunction is selected. If keep pressing

The"RESERVATION/CALEFACTION"button for more than 2 s, the temperature indicator turns off, and the heating function is cancelled. The

initial temperature is about 30 , and you can select your

 

desired value in 3 s in a switching sequence 30

40

20 .

After the machine starts running, if selection or cancellation of heating function is desired, you should switch off the power and reselect.

11

Image 13
Contents Fuzzy Computerized Automatic Washing Machine Contents Names of the parts Beforef re Usingi Safety precautionsSafety precautions Install the bottom plate Installation and adjustmentAdjust the installation position Usage of the drain hose How to change the direction of the drain hoseInstall the water inlet hose Take down the water inlet hose Pay attention to followings before washing the laundries Preparation before washing Usingi processHow to use the washing powder How to use the whitenerPut in the laundries Usage of the detergentDescription of the function of the buttons Use the operation buttonsStart Pause Press the Power ON/OFF button to the power supply Operating procedure and explanations for ButtonsSwitch on Selection method of the procedure programs Finish washing Close the top lidPress the Water Level button to select suitable water level Press the start/pause buttonDisposal after washing Trouble shooting Answer to question Packing list Specification