Haier XQB55-10H user manual Contents

Page 2

Contents

 

Names of the parts

1

Safety precautions

2

Installation and adjustment

4

Preparation before washing

8

Put in the laundries

9

Usage of the detergent

9

Use the operation buttons

10

Close the top lid

14

Finish washing

14

Disposal after washing

15

Trouble shooting Answer to questions

16

Packing list

17

Description of heating function

1. Heating function can be selected for "Normal", "Jeans", "Gentle" and"Quick" programs, but it's unavailable for "Rinse"process.

2.If heating function is selected, for water levels "1"or "2", it begins to heat after water reaches the set level, and begins to wash when the set temperature is reached; for water levels "3"-"6", it begins to heat upon water reaching level "2", it continues water supply and gently agitates while heating to the set temperature, then it begins normal washing; for water levels above "6", the cycle is: after water reaching level "2", it begins to heat, meanwhile water supply continues until level "6", water supply stops and it continues heating to the set temperature, then it begins to wash while water supply is resuming, (the hot water temperature then is good for detergent active enzyme function and for the clothes to be in an optimum detergent concentration with a good washing effect. The subsequent washing while water supply can facilitate dirt flushing and removing), water supply stops when reaching the set level, then it continues to wash normally. For high water levels, only the water amount below level "6" can be heated to the set temperature, then it washes and supplements water to the set level

3. This washing machine provides 3 temperature selections of 20 , 30 and 40 , each ranging as follows

20 3 30 3 40 3

Image 2
Contents Fuzzy Computerized Automatic Washing Machine Contents Names of the parts Safety precautions Beforef re UsingiSafety precautions Adjust the installation position Installation and adjustmentInstall the bottom plate How to change the direction of the drain hose Usage of the drain hoseInstall the water inlet hose Take down the water inlet hose Preparation before washing Usingi process Pay attention to followings before washing the laundriesPut in the laundries How to use the whitenerHow to use the washing powder Usage of the detergentUse the operation buttons Description of the function of the buttonsStart Pause Switch on Operating procedure and explanations for ButtonsPress the Power ON/OFF button to the power supply Selection method of the procedure programs Press the Water Level button to select suitable water level Close the top lidFinish washing Press the start/pause buttonDisposal after washing Trouble shooting Answer to question Specification Packing list