Disposal after washing | Usingi | process |
|
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
The lint filter must be used during washing.
It must be cleaned in time after each using.
1.Take off the lint filter
Put hand at the indicated position. Push down to take it off. ( See to
Figure 1)
2. Clean the lint | Figure 1 |
| |
Put it in water and clean while it is |
|
still wet.(See to Figure 2) |
|
3. Install the lint filter |
|
|
After cleaning, insert the | bottom | Figure 2 |
of the lint filter ( marked | with |
|
"down side") into the filter frame , then push the upper part of the filter in ( marked with " up side ").
(See to Figure 3) | Figure 3 |
|
The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcoholetc.
Alcohol
Thinner
Petrol
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using. 3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.
15