Haier XQB55-10H user manual Close the top lid, Finish washing, Press the start/pause button

Page 16
the washing will finish about 18 hours later

Usingi process

4 Press the "WATER LEVEL" button to select suitable water level

WATER

LEVEL

SELECTION

After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10.

Page 10

5 Push the " RESERVATION/CALEFACTION" button to select suitable reserve program

RESERVATION CALEFACTION

After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the

"RESERVATION/CALEFACTION"button to set a reserved wash program. Refer to The button of "RESERVATION/CALEFACTION" on page 11.

Confirm the reserve program

Page 11

When "Reservation" becomes active, the nixie tube displays the time to the end of the reserved wash cycle, and the indicator turns on.

To change the running program or cancel the reservation, you should cut off the supply and reselect.

Confirm the heating function

Keep pressing the "RESERVATION/CALEFACTION" button for more than 2 s, the heating indicator turns on (red).

Keep pressing the "RESERVATION/CALEFACTION"button for more than 2 s again, the heating indicator turns off and heating function is cancelled.

After the machine starts running, if selection or cancellation of heating function is desired, you should switch off the power and reselect.

6 Press the "start/pause" button

Close the top lid

START PAUSE

Except water filling (excluding heating function) and draining process, if the top lid is opened, the machine will stop running and alarm.

Finish washing

The washing machine cuts off the power supply automatically when wash cycle ends.

14

Image 16
Contents Fuzzy Computerized Automatic Washing Machine Contents Names of the parts Safety precautions Beforef re UsingiSafety precautions Install the bottom plate Installation and adjustmentAdjust the installation position How to change the direction of the drain hose Usage of the drain hoseInstall the water inlet hose Take down the water inlet hose Preparation before washing Usingi process Pay attention to followings before washing the laundriesHow to use the whitener How to use the washing powderPut in the laundries Usage of the detergentUse the operation buttons Description of the function of the buttonsStart Pause Press the Power ON/OFF button to the power supply Operating procedure and explanations for ButtonsSwitch on Selection method of the procedure programs Close the top lid Finish washingPress the Water Level button to select suitable water level Press the start/pause buttonDisposal after washing Trouble shooting Answer to question Specification Packing list