Haier XPB50-BS, XPB50-AS user manual Midway spinning

Page 12

Using process

Midway spinning

1.Put the laundries into the spin tub evenly and smoothly.

2.Spin

(1) Put the gland in properly.

Please put in the gland properly even if the laundries quantity is small.

Push Gland

Push

Proper	The laundries	Proper No gland
	are slanting

(2) Close the inner and outer cover of the spin tub.

	Outer cover of
	The spin tub
(3) Spin for 1-2 minutes.	Inner cover of
(3) Spin for 1-2 minutes.	The spin tub

3.Run the foam-removing spinning.

(1)Open the outer cover of the spin tub.

(2)Set the water-filling selector control

rod at the "SPIN" side. Fill water for

WASH SPIN

about 1 minute.

If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling.

(3) Close the outer cover of the spin tub. Spin for 1-2 minutes.

Image 12

Contents XPB50-AS XPB50-BSwith pump Air BubbleTwin-tub Washing MachineNames of the parts Safety precautions Petrol Installation and adjustment How to change the direction of the drain hoses Introduction of the major function Using process Using process Musts in washing Using process Reference weight of the laundriesUsage of the detergent Using process How to use the whitenerWashing sequence Midway spinning Rinsing Rinse with water-filingSpinning Disposal after washing Using process Cleaning the lint filterCleaning the overflow filter Trouble-shooting Answer to question If the laundries fall to the outer side of the spin tubPhenomena Reason Packing list Specification XPB50-AS XPB50-BS