Using process
Rinsing
Rinse with water-filing
1.Put the laundries into the wash tub. Select suitable current according to the laundries.
2.Adjust the water level
Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously.
3.Rinse
Adjust the wash timer to
OVERFILL
If the water flows out of the overfill holes, that is overfilling
Rinse with stored water | (Repeat the midway spinning and | |
rinsing with stored water for | ||
|
1.Put the laundries into the wash tub. Select suitable current according to the laundries.
2.Fill water to preset water level.
3.Rinse
Adjust the wash timer to
When the laundries quantity is below 2.4kg, please use "Standard" current. If you use "Strong" current, it may splash.