Haier XPB50-AS, XPB50-BS user manual Introduction of the major function Using process

Introduction of the major function Using process

The machine has good comprehensive performance, and nice appearance. In the respect of increasing the clean rate, it creates the air suction washing method.

The spinning of the pulsator automatically produces large quantity of bubbles, which can strengthen the activity of the detergent remarkablly. And the rising and exploding of the bubbles produce the effects of absorption and bombardment on the dirt particles in the fibre of clothes that is difficult to remove by common washing methods.

It adopts complete enclosed base frame and low-noise motor, and thus reduces the working noise significantly. We can guarantee that the purchase of this machine will bring you a clean world without disturbing your quiet life.

Bubble washing

When the pulsator rotates, the machine will
inhale air and produce small bubble. The bubble
can explode and produce tiny water current to	Pulsator
help dissolving the detergent, and improve the
cleaning capability the detergent , therefore
raise the cleaning ratio.

Foam-removing spinning during high-efficiency rinsing

Use the foam-removing spinning to remove the extra detergent liquid. It can both shorten the washing time and save the water consumption.

Spin

Spin for about 1~2 minutes

Foam-removing spinning

Fill water for	Spin for about
about 1 minutes	1~2 minutes

	Remove most of the foam		Remove the detergent
	extra detergent liquid. it can		liquid remained
	both	shorten the washing
	time	and save the water
	consumption.
		The effect		is best when the
		laundries		quantity is below
		80% of the rated value.
Quick water-filling entrance
If	you do not need spraying spin,	you can
fill		Quick water-filling entrance
	water into the wash tub directly through
this entrance. It can reduce the humidity
inside the control panel significantly and
prolong the operating life of the components.