4 Use the operation button
aDescription of operation button
Indicator mode and meaning
Connection between the water inlet hose and the washer
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water 
inlet hose
"START/PAUSE" button
After the power is switched on, press it to start the machine
During working, push it to pause.Wash 
During pause, push this button to restart
and go on working
Soak
Rinse
Overflow
Spin
Wash/spin speed
•
•
jointer of the | water absorption |
water inlet valve | cushion. |
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer. |
|
|
|
|
|
| the jointer of the |
|
|
|
|
|
| ||
|
|
|
|
|
|
| water inlet hose |
| Locking level |
|
| ||||
|
|
|
| Slider | |||
2 Hang the lock lever to the jointer. Release the slider till a click |
|
|
|
|
|
| |
|
|
|
|
|
| ||
START |
|
|
|
|
PAU |
|
|
|
|
SE | SOAK |
|
|
|
| WASH |
|
| |
|
|
| SPIN | |
|
| SPEED | RINSE | |
|
|
| SPEED | |
|
|
|
|
sound is heard.
Check the connection between the jointer of the water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain.
"SOAK "button
Press the Soak button to select a soak procedure.
The button can be used to select the desired soak time( 10, 20 minutes) from the Normal and Comforter programs.
The button is unavailable from the Saving,Speedily, Standard, Woollen, Carpet and Delicate programs.
"WASH/SPEED " button
Press the Wash button to select a wash procedure .
The button can be used to select the desired wash time( 0,6,9,12,15 minutes) from the Normal and Jean program.
The button is unavailable from the Saving,quickwash,posthaste Standard, Carpet, Woollen programs.
For the Normal Jean program, press the button for 2 seconds to start wash speed selection. The speed from 1 to 4 is available for selection. The default value is 2.
"RINSE" button
Press the Rinse button to select a rinse procedure.
The button can be used to select the desired number of rinse cycles, (0, 1, 2 , 3 times )from the Normal program or the Jean program. While the "Overflow" digitron is lighting,the program of the overflow rinse has been selected.
The button is unavailable from the Saving,quickwash,posthaste Standard, Carpet, Woollen programs.
"SPIN/SPEED " button
Press the Spin/Speed button to
select a spin procedure.
The button can be used to select
the desired spin time(1,3,5,7 minutes )from the Normal program or the Jean program.
The button is unavailable from the Saving,quickwash,posthaste Standard, Carpet, Woollen programs.
For the Normal or Jean program,
press the button for 2 seconds to start spin speed selection. The speed from 1 to 4 is available for selection. The default value is 2.
4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then pull of the water inlet hose.
If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.
Locking level 
Slider