Haier WNA500T, WNA600T manual Cycle is started, Wash is finished

Page 16

Using instructions:Your machine

offers the best results when...

The cycle is started

You can now start washing. We would advise you, especially the first few times, to check that the programme that you have set is really the one you want and that the fabric selection is correct.

If you want to start the cycle immediately, press the ON/OFF button D.

The wash is finished

At the end of the chosen cycie, the machine will stop automatically.

Press the ON/OFF button D to switch off the power (light C will turn off).

16

Image 16
Contents Haier Page 20-21 12-1618-19 Function Introduction Characteristics of WNA600T WNA500T Installation Unpacking levelling and positioningElectric connection Connection of tap and Loading HoseConnecting WaterSupply Close up MAX 12C Weight is right Laundry hasBeen loaded CorrectlyProgramme has CorrectBeen chosen Detergent has been put in properly Never place bleach in the other compartments Cycle is started Wash is finishedMaintenance five simple precautions for this machine Washing MachineWont start Machine wontVibrates too Much whenSpinning Stops operatingGuide for selecting programme Page Wiring Circuit WNA500T WNA600T