Haier WNA600T, WNA500T manual Correct, Programme has, Been chosen

Page 13

Using instructions:Your machine

offers the best results when...

The correct

A perfect wash depends above all on choosing the most

programme has

suitable programme. We would therefore advise you to

been chosen

divide up your washing into separate loads of more or

 

less the same types of fabric. This will make it easier to

 

select the best programme.

 

Hints on choosing the programme are shown in the table

 

on pages of this manual.

 

Once you have selected a programme, just turn dial

 

A clockwise until the chosen programme lines up with

 

the indicator line on the facia panel.

Anti-creaseWhen your machine is washing synthetic fabrics or woollens, the wash cycle stops before the last spin cycle, with the laundry soaked in water in order to prevent the formation of creases due to spinning. Complete the wash cycle with a spin cycle or simply drain the water from the washing machine without spinning.

For the spin cycle, turn the selector knob A clockwise by one step.

To drain, set the selector knob A on drain programme in both cases, before turning the knob A remember to switch OFF the ON/OFF button D.

13

Image 13
Contents Haier Page 20-21 12-1618-19 Function Introduction Characteristics of WNA600T WNA500T Unpacking levelling and positioning InstallationConnection of tap and Loading Hose Electric connectionConnecting WaterSupply Close up MAX 12C Laundry has Weight is rightBeen loaded CorrectlyProgramme has CorrectBeen chosen Detergent has been put in properly Never place bleach in the other compartments Wash is finished Cycle is startedMaintenance five simple precautions for this machine Machine WashingWont start Machine wontMuch when Vibrates tooSpinning Stops operatingGuide for selecting programme Page Wiring Circuit WNA500T WNA600T