Haier WNA500T, WNA600T Washing, Wont start, Machine wont, Fill with water, Fills and drains

Page 18

Solution to Problems

 

 

Even though your washing machine has been carefully

 

 

designed and constructed, something could still go a miss

 

 

with your machine. Before rushing to phone one of our

 

 

service centres, however, please check that the operations

 

 

listed below have been carried out. In many cases you will

 

 

save time, money and bother. Our statistics show that many

 

 

of the calls received by our service centres could have been

 

 

avoided with just a little more attention.

 

 

 

 

The washing

Check that:

machine

the plug is pushed right into the mains socket;

won't start

the door is closed tightly:

the "ON/OFF" button has been pressed.

 

 

 

 

 

 

The washing

Check that:

machine won't

the tap is open and properly connected to the inlet

fill with water

pipe;

the inlet pipe is not bent.

 

 

 

 

 

 

The machine

Check that:

fills and drains

the drain pipe is placed at least 80 cm/32 inches

continuously

above ground level.

 

 

 

 

The machine will not drain drain the water

Check that:

the drain pipe is not blocked;

the drain pipe is not connected at a height more than 1 metre/40 inches above ground level.

There is too much foam in the tub

Check that:

the detergent being used is meant for automatic machines and not for washing by hand;

that the amount used is that shown in this manual and not more.

18

Image 18
Contents Haier Page 12-16 20-2118-19 Function Introduction Characteristics of WNA600T WNA500T Installation Unpacking levelling and positioningElectric connection Connection of tap and Loading HoseConnecting WaterSupply Close up MAX 12C Been loaded Weight is rightLaundry has CorrectlyCorrect Programme hasBeen chosen Detergent has been put in properly Never place bleach in the other compartments Cycle is started Wash is finishedMaintenance five simple precautions for this machine Wont start WashingMachine Machine wontSpinning Vibrates tooMuch when Stops operatingGuide for selecting programme Page Wiring Circuit WNA500T WNA600T