Haier WNA600T, WNA500T manual

Page 21

Warning:

1.If the supply card is damaged, it must be replaced by a special card or assembly available from the manufacturer or it is service agent.

2.It a stationray appliance is provided with a supply card and a plug, the instructions shall state that the appliance must be positioned

so that the plug is accessible.

Note: this requirement dose not apply if the appliance incorporates other means for disconnection from the supply.

3.For washing machines with ventilation openings in the base, that a carpet must not obstruct the openings.

4.The instructions shall state that the appliance is to be connected to the water mains using new hose-sets and that old hose-sets

should not be reused.

Note: this instructions is not required if the hoses are permanentiy attached to the appliance.

22

Image 21
Contents Haier Page 12-16 20-2118-19 Function Introduction Characteristics of WNA600T WNA500T Unpacking levelling and positioning InstallationConnection of tap and Loading Hose Electric connectionConnecting WaterSupply Close up MAX 12C Laundry has Weight is rightBeen loaded CorrectlyCorrect Programme hasBeen chosen Detergent has been put in properly Never place bleach in the other compartments Wash is finished Cycle is startedMaintenance five simple precautions for this machine Machine WashingWont start Machine wontMuch when Vibrates tooSpinning Stops operatingGuide for selecting programme Page Wiring Circuit WNA500T WNA600T