Xantrex Technology manual Mounting your inverter, To mount your HI400 inverter

Page 26

Installing the HI400

Ventilated

See the warning on page 15. Allow at least 5

 

inches of clearance on each size of the

 

inverter for air flow. Do not allow the

 

ventilation openings on the unit to become

 

obstructed. Make sure the compartment in

 

which the inverter is installed allows airflow

 

through the compartment.

Safe

See the warning on page 15. Do not install

 

the inverter in the same compartment as

 

batteries or in any compartment capable of

 

storing flammable liquids like gasoline.

Close to battery

Avoid excessive cable lengths (these reduce

compartment

input and output power due to wire

and the AC

resistance). It is preferable to have lengthier

source and load

AC cables than DC cables, as the AC current

 

is far lower than the DC. Use the

 

recommended cable sizes.

Protected from

Never allow battery acid to drip on the

battery acid and

inverter or its wiring when filling or reading

gases

its specific gravity. Do not mount the unit

 

where it will be exposed to gases produced

 

by the batteries. These gases are corrosive

 

and prolonged exposure will damage the

 

inverter.

Mounting your inverter

The HI400 inverter must be mounted flat (for example, on or under a horizontal surface) in order to comply with safety agency requirements.

To mount your HI400 inverter:

1.Turn the On/Off switch on the inverter to the off position.

2.Fasten the inverter to the mounting surface, using four #10 pan head steel wood screw (5/8” long minimum) or #10 bolts inserted through the mounting holes in the flanges (running along the sides of the inverter).

16

Page 25 Page 27
Image 26
Page 25 Page 27
Contents HI400 Date and Revision Contents Battery Types and Sizes Maintenance and TroubleshootingSpecifications OperationWarranty and Product Information Page Important safety information General precautionsExplosive gas precautions Precautions when working with batteries Precautions for using rechargeable appliances Introduction Introduction Introduction HI400 features ➀ ➁ ➂ ➃ ➄ ➅Back panel Materials list Installation Preparing for installation Installation codesInstallation tools and materials Installation features ➁ ➂ ➃ ➄ ➅Overview Installing the HI400Designing your installation AC disconnects and over-current protection devices AC output neutral bonding DC cabling Choosing a location Mounting your inverter To mount your HI400 inverterPermanently connecting hardwiring the AC output To hardwire the AC output connectionsInstalling the ignition lockout wiring To install the ignition lockout wiringConnecting the DC cables Connecting the battery to the DC input To make the DC connectionsConnecting the DC ground To connect the DC groundConnecting the AC input cord To connect the AC input cordTo turn on the HI400 Checks prior to initial power-upStarting up and testing your installation Page Operation Inverter on and off Operation featuresGround fault circuit interrupter Gfci protection Ignition lockout Low battery conditionAlternate AC source Operating several loads at once Problem loadsInverter loads Battery charging frequency Turning the inverter off between chargesPage Maintenance and Troubleshooting Common problems Buzz in audio equipment MaintenanceTroubleshooting Television interferenceTroubleshooting reference Problem Possible Cause SolutionGfci Specifications Electrical PhysicalBattery Types and Sizes Deep-cycle lead-acid batteries Battery typesAutomotive starting batteries Battery size Estimating battery requirements To determine how much battery capacity you needBattery sizing example Appliance For this Consumption Time per day = a x BBattery sizing worksheet Two batteries connected in parallel Using multiple batteriesTwo separate battery banks Battery tips Battery voltage State of charge Page Warranty Product Information Warranty information Returning a product If you are returning a product from the USA or CanadaOut-of-warranty service Contacting Xantrex Customer Service Other Xantrex productsPage Index Index Index Index

HI400 specifications

Xantrex Technology HI400 is a high-performance, pure sine wave inverter designed for a variety of off-grid and backup power applications. Renowned for its efficiency and reliability, the HI400 provides an output of 400 watts, making it suitable for powering sensitive electronic devices and appliances, such as laptops, medical equipment, and home entertainment systems. Its pure sine wave output ensures that the devices operate smoothly, without causing interference or damage.

One of the main features of the HI400 is its advanced surge capability. This inverter can deliver short bursts of power significantly higher than its rated output, allowing it to start devices with high inrush currents, like refrigerators and air conditioners. The inverter is equipped with a built-in transfer switch for seamless switchover between grid power and inverter power, ensuring uninterrupted operation during power outages.

The HI400 incorporates Xantrex’s proprietary technology, which enhances its durability and operational efficiency. The inverter features a high-frequency design that minimizes energy losses, resulting in a lower overall power consumption. It also operates quietly, making it ideal for use in residential environments where noise might be a concern.

Another characteristic of the HI400 is its lightweight and compact design, which facilitates easy installation and portability. The unit can be mounted in various locations, making it versatile for both mobile and stationary applications. The inverter comes with a range of safety features, including overload protection, short-circuit protection, and thermal shutdown, ensuring that it operates safely and prolongs its lifespan.

User-friendly features enhance the overall appeal of the HI400. It includes LED indicators that provide real-time information about the operational status, such as input voltage, output load, and fault conditions. This enables users to easily monitor performance and troubleshoot any issues that may arise.

Overall, the Xantrex Technology HI400 stands out as a reliable and efficient power inverter solution. Its combination of advanced technologies, safety features, and user-friendly design makes it a go-to choice for anyone looking to power their devices off the grid or during emergencies.
Top Page Image Contents