Adjusting the sound
You can adjust the sound characteristics to your preference.
1
*1 Displayed only when “L/O MODE” is set to “WOOFER” (see page 21).
Ex.: When “TRE” is selected
2
Indication pattern changes as you adjust the level.
Indication | To do: | Range |
|
|
|
BAS*2 | Adjust the bass. | |
(bass) |
| to |
|
| +06 (max.) |
|
|
|
TRE*2 | Adjust the treble. | |
(treble) |
| to |
|
| +06 (max.) |
|
|
|
FAD*3, *7 | Adjust the front | R06 (Rear |
(fader) | and rear speaker | only) |
| balance. | to |
|
| F06 (Front |
|
| only) |
|
|
|
BAL*7 | Adjust the left | L06 (Left |
(balance) | and right speaker | only) |
| balance. | to |
|
| R06 (Right |
|
| only) |
|
|
|
LOUD*2 | Boost low and | LOUD ON |
(loudness) | high frequencies | J |
| to produce a well- | LOUD |
| balanced sound at | OFF |
| low volume level. |
|
|
|
|
SUB. W*4 | Adjust the | 00 (min.) |
(subwoofer) | subwoofer output | to |
| level. | 08 (max.) |
|
|
|
VOL*5 | Adjust the | 00 (min.) |
(volume) | volume. | to |
|
| 30 or 50 |
|
| (max.)*6 |
*2 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode
*3 If you are using a
*4 This takes effect only when a subwoofer is connected.
*5 Normally the control dial works as the volume control. So you do not have to select “VOL” to adjust the volume level.
*6 Depending on the amplifier gain control setting. (See page 22 for details.)
*7 This adjustment cannot affect the subwoofer output.
ENGLISH
19