OPERATION
1.Turn the ON/OFF switch to the ON position. The pump will begin to deliver air into the bubble pad.
2.Replace all sheets, blankets, and pillows on the bed.
Info: if the pressure level seems low, check for any leakage in the air tubes or bubble pad. Replace any damaged tubes. If necessary, contact your
AQ2000 ONLY: PRESSURE ADJUSTMENT
Adjust the pressure control dial for comfort.
Info: For maximum effectiveness, patient should sink into bubble pad to reduce pressure points. Ensure that patient does not bottom out.
QUICK DISCONNECT
Pull the power plug from the wall connector to disconnect the device quickly.
CPR FUNCTION
If CPR must be performed on the patient while the bubble pad is in use, to immediately deflate the bubble pad, pull the air tubes off the bubble pad or pump connectors.
| 11 |