Humminbird Wide Portrait Inside the Hull Installation, Step One Determine the Mounting Location

Page 10

INSTALLATION

INSIDE THE HULL INSTALLATION

INSIDE THE HULL INSTALLATION

Inside the hull installation requires the mount system and control head be installed and operational. See Installing the Control Head for instruction on installing the unit.

Inside the hull mounting generally produces good results in single thickness fiberglass-hulled boats. Humminbird cannot guarantee depth performance when transmitting and receiving through the hull of the boat since some signal loss occurs. The amount of loss depends on hull construction and thickness, and the installation.

This installation requires slow-cure two-part epoxy. Do not use silicone or any other soft adhesive to install the transducer, as this material reduces the sensitivity of the unit. Five minute epoxy has a tendency to cure before all the air bubbles can be purged.

Step One - Determine the Mounting Location

Begin the transducer installation by determining where inside the hull to install the transducer. Consider the following to find the best location:

∙Observe the outside of the boat hull to find the areas that are mostly free from turbulent water. Avoid ribs, strakes, and other protrusions as these create turbulence (Figure 14).

∙As a general rule, the faster the boat can travel the further aft and closer to the centerline of the hull the transducer has to be located to remain in contact with the water at high speeds.

Step Two - Test the Mounting Location

There is no opportunity for adjustment after the transducer glued

in place. Therefore, it is best to perform a trial installation on inside the hull transducers first, and run the boat at high speeds to determine the best mounting area.

1.At the identified mounting location, lay the transducer body face down with the pointed end towards the bow.

2.Fill the hull with enough water to submerge the transducer body. Use a sand filled bag or other heavy object to hold the transducer in position.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Trolling Motor Mounting Alternate Transducers and Mounting MethodsPortable Mounting Thru-Hull MountingBeginning Installation Transducer ExchangeTransom Installation Step One Determine Where to Mount the Transducer Step Two Drill the Mounting Holes Step Three Assemble the TransducerStep Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Three Drill the Mounting Holes Step Four Run the CablesPage Step Five Assembling the Connector Holder Your Humminbird is now ready for operationTest the Installation Testing the Installation Using the Wide Portrait Simulator OperationFeature Memory Interpreting the ON-SCREEN Information Page Page Control Functions Page Sensitivity Depth Range Page Zoom Depth Alarm Fish Alarm Triplog Page Page Page Page Using Diagnostic Customizing SET-UP FunctionsPage Using Alternative Transducers Specifications

Wide Portrait specifications

The Humminbird Wide Portrait stands out in the realm of fish finders and chart plotters, designed with both professional anglers and casual fishermen in mind. Its innovative features and cutting-edge technologies make it a staple for anyone serious about their time on the water.

One of the defining characteristics of the Humminbird Wide Portrait is its expansive display. With a large screen that is oriented in portrait mode, users benefit from increased vertical viewing space, which enhances visibility of underwater structures, fish, and waypoints. The display employs high-resolution color graphics, ensuring clarity even in bright sunlight. The intuitive interface allows for easy navigation through menus, making it accessible for users of all skill levels.

At the heart of the Humminbird Wide Portrait is its advanced sonar technology. With features like DualBeam Plus sonar and SwitchFire, users can explore underwater environments with precision. DualBeam Plus employs two sonar beams, allowing for detailed imaging at varying depths and providing a more comprehensive view of the underwater landscape. SwitchFire technology enhances this experience by enabling users to toggle between different display modes, tailoring the view to their specific needs.

Notably, the Humminbird Wide Portrait integrates GPS capabilities, offering built-in cartography and the ability to create customized maps. This feature proves invaluable for planning fishing trips, as users can mark hotspots, track their movements, and quickly return to favorite locations. The unit also supports the Humminbird LakeMaster and Navionics mapping options, further expanding its navigational capabilities.

User-friendly features like the ability to set up split-screen views enhance the functionality of the Humminbird Wide Portrait. Anglers can simultaneously monitor sonar readings alongside GPS data, providing a comprehensive picture of both location and fish activity. Additionally, the device's rugged design ensures it can withstand the harsh conditions often encountered while fishing.

In conclusion, the Humminbird Wide Portrait is a game-changer for anglers who value technology and functionality in a compact package. With its advanced sonar capabilities, expansive display, integrated GPS, and user-friendly features, it remains an essential tool for maximizing time on the water and enhancing the fishing experience. Whether you're a seasoned pro or just starting, the Humminbird Wide Portrait empowers you to fish smarter and with greater confidence.
Top Page Image Contents