Humminbird Wide Portrait Step Two Drill the Mounting Holes, Step Three Assemble the Transducer

Page 7

INSTALLATION

TRANSOM INSTALLATION

∙If the propeller(s) is (are) forward of the transom, it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered.

Step Two - Drill the Mounting Holes

1.Remove the mounting template from the front of the Operations Manual.

2.Hold the template on the transom of the boat in the location where the transducer will be installed (Figure 4). Align the template vertically, ensuring the lower edge of the transom meets with the bottom corner

of the template.

3.Using a pencil or punch, mark the two mounting holes shown on the template onto the transom. Do not mark or drill any other holes at this time.

4.Using a 5/32” (4mm) bit drill the two holes to a depth of approximately 1" (3cm). On fiberglass hulls, it is best to start with a smaller bit and use progressively larger drill bits to reduce the chance of chipping or flaking the outer coating.

Step Three - Assemble the Transducer

1.Attach the Pivot to the transducer body as shown in Figure 5, using the #8 – 3/8” (9mm) long allen headed pivot screw, the headed pin, the two flat washers, and the two toothed lock washers.

Note: The toothed lock washers must be positioned between the transducer and the pivot ears. The flat washers must be positioned to the outside at the pivot ears.

2.Using the AIlen wrenches provided, loosely tighten the pivot screw (Figure 6). Do not completely tighten the assembly at this time, so the pivot angle can be adjusted later.

3.Insert the pivot/transducer assembly into the mounting bracket as shown in Figure 7. Do not snap the assembly closed.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Thru-Hull Mounting Alternate Transducers and Mounting Methods Portable Mounting Trolling Motor MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesStep Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Testing the Installation Simulator Operation Using the Wide PortraitFeature Memory Interpreting the ON-SCREEN Information Page Page Control Functions Page Sensitivity Depth Range Page Zoom Depth Alarm Fish Alarm Triplog Page Page Page Page Customizing SET-UP Functions Using DiagnosticPage Using Alternative Transducers Specifications

Wide Portrait specifications

The Humminbird Wide Portrait stands out in the realm of fish finders and chart plotters, designed with both professional anglers and casual fishermen in mind. Its innovative features and cutting-edge technologies make it a staple for anyone serious about their time on the water.

One of the defining characteristics of the Humminbird Wide Portrait is its expansive display. With a large screen that is oriented in portrait mode, users benefit from increased vertical viewing space, which enhances visibility of underwater structures, fish, and waypoints. The display employs high-resolution color graphics, ensuring clarity even in bright sunlight. The intuitive interface allows for easy navigation through menus, making it accessible for users of all skill levels.

At the heart of the Humminbird Wide Portrait is its advanced sonar technology. With features like DualBeam Plus sonar and SwitchFire, users can explore underwater environments with precision. DualBeam Plus employs two sonar beams, allowing for detailed imaging at varying depths and providing a more comprehensive view of the underwater landscape. SwitchFire technology enhances this experience by enabling users to toggle between different display modes, tailoring the view to their specific needs.

Notably, the Humminbird Wide Portrait integrates GPS capabilities, offering built-in cartography and the ability to create customized maps. This feature proves invaluable for planning fishing trips, as users can mark hotspots, track their movements, and quickly return to favorite locations. The unit also supports the Humminbird LakeMaster and Navionics mapping options, further expanding its navigational capabilities.

User-friendly features like the ability to set up split-screen views enhance the functionality of the Humminbird Wide Portrait. Anglers can simultaneously monitor sonar readings alongside GPS data, providing a comprehensive picture of both location and fish activity. Additionally, the device's rugged design ensures it can withstand the harsh conditions often encountered while fishing.

In conclusion, the Humminbird Wide Portrait is a game-changer for anglers who value technology and functionality in a compact package. With its advanced sonar capabilities, expansive display, integrated GPS, and user-friendly features, it remains an essential tool for maximizing time on the water and enhancing the fishing experience. Whether you're a seasoned pro or just starting, the Humminbird Wide Portrait empowers you to fish smarter and with greater confidence.
Top Page Image Contents