Humminbird Wide Portrait manual Testing the Installation

Page 19

TESTING THE INSTALLATION

After installation is complete and all connections are made, you are ready to test the installation prior to actual size. Thorough testing should be performed with the boat in the water; however, you can initially confirm basic operation with the boat trailered.

Press POWER once to turn the unit on. There will be an audible chirp when any button is pressed that confirms the button press. If the unit does not power-up, ensure that the unit is fully seated on the mount and that power is available.

The first screen provides four options; Start-up, Options, Simulator, and Diagnostic.

The time remaining before the screen “times out” is shown at the bottom of the screen. If you do not press any button before the timer reaches 0, the normal operation screen will be displayed. If the boat is on water, sonar data will begin to appear. If no transducer is connected or detected, the Portrait will go into simulator mode after the initial menu screen times out.

Note: The transducer must be submerged in water for reliable transducer detection.

If the bottom is visible on-screen with a digital depth readout, the unit is working properly. If the unit powers-up but fails to display bottom information, the transducer is not properly connected. Ensure that the boat is in water greater than 2 feet but less than 600 feet deep, and that the transducer is fully submerged. Remember that the sonar signal cannot pass through air. Refer to the troubleshooting section of this manual. If the unit is working properly, gradually increase the boat speed to test high-speed performance. If the unit functions well at low speeds but begins to skip or miss the bottom at higher speeds, the transducer installation requires adjustment. Refer to the appropriate transducer installation section for more detail.

Note: It is often necessary to make several incremental transducer adjustments before optimum high-speed performance is achieved.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Thru-Hull Mounting Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesStep Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Testing the Installation Simulator Operation Using the Wide PortraitFeature Memory Interpreting the ON-SCREEN Information Page Page Control Functions Page Sensitivity Depth Range Page Zoom Depth Alarm Fish Alarm Triplog Page Page Page Page Customizing SET-UP Functions Using DiagnosticPage Using Alternative Transducers Specifications

Wide Portrait specifications

The Humminbird Wide Portrait stands out in the realm of fish finders and chart plotters, designed with both professional anglers and casual fishermen in mind. Its innovative features and cutting-edge technologies make it a staple for anyone serious about their time on the water.

One of the defining characteristics of the Humminbird Wide Portrait is its expansive display. With a large screen that is oriented in portrait mode, users benefit from increased vertical viewing space, which enhances visibility of underwater structures, fish, and waypoints. The display employs high-resolution color graphics, ensuring clarity even in bright sunlight. The intuitive interface allows for easy navigation through menus, making it accessible for users of all skill levels.

At the heart of the Humminbird Wide Portrait is its advanced sonar technology. With features like DualBeam Plus sonar and SwitchFire, users can explore underwater environments with precision. DualBeam Plus employs two sonar beams, allowing for detailed imaging at varying depths and providing a more comprehensive view of the underwater landscape. SwitchFire technology enhances this experience by enabling users to toggle between different display modes, tailoring the view to their specific needs.

Notably, the Humminbird Wide Portrait integrates GPS capabilities, offering built-in cartography and the ability to create customized maps. This feature proves invaluable for planning fishing trips, as users can mark hotspots, track their movements, and quickly return to favorite locations. The unit also supports the Humminbird LakeMaster and Navionics mapping options, further expanding its navigational capabilities.

User-friendly features like the ability to set up split-screen views enhance the functionality of the Humminbird Wide Portrait. Anglers can simultaneously monitor sonar readings alongside GPS data, providing a comprehensive picture of both location and fish activity. Additionally, the device's rugged design ensures it can withstand the harsh conditions often encountered while fishing.

In conclusion, the Humminbird Wide Portrait is a game-changer for anglers who value technology and functionality in a compact package. With its advanced sonar capabilities, expansive display, integrated GPS, and user-friendly features, it remains an essential tool for maximizing time on the water and enhancing the fishing experience. Whether you're a seasoned pro or just starting, the Humminbird Wide Portrait empowers you to fish smarter and with greater confidence.
Top Page Image Contents