Humminbird Wide Portrait manual Step Four Mount the Transducer to the Transom

Page 8

INSTALLATION

TRANSOM INSTALLATION

Step Four - Mount the Transducer to the Transom

1.Apply silicone sealant to the mounting holes drilled into the transom.

2.Align the transducer assembly with the drilled holes in the transom (Figure 8).

3.Use either a flat head screwdriver, a 5/16" (8mm) hex driver, or a 5/16" (8mm) socket to mount the assembly. Using the two #10 – 1”

(25mm) long slotted hex head screws, mount the transducer assembly to the transom as shown. Do not fully tighten the mounting screws in order to vertically adjust the transducer. Snap the pivot down into place.

Step Five - Adjust the Running Position of the Transducer

The bracket allows height and tilt adjustment, the pivot screws allow angular adjustment. Initially, adjust the transducer as described in the following paragraphs. Further adjustment may be necessary to refine the instillation after high speed testing.

1.First adjust the pivot angle of the transducer body so its length is parallel with the length of hull of the boat. Then pivot the transducer down so the rear is about 1/4 inch (6mm) lower than the front (Figure 9).

2.Fully tighten the two pivot screws using the Allen wrenches. It may be necessary to retighten the pivot screws after the initial use as the plastics may still be seating to the lock washers.

3.Adjust the height of the assembly so the face of the transducer is 3/16" (4.5mm) beneath the lower edge of the transom (Figure 10). Mark the position of the mounting bracket on the transom with a pencil.

4.Force the pivot to the up position to gain access to the mounting screws. Assure the transducer location has not changed, then fully tighten the two mounting screws (Figure 11). Snap the pivot back down.

Confirm the pivot angle has not changed.

Note: A third screw location is provided for the

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Parts Supplied AccessoriesInstallation Overview Determining How to Mount the Transducer Alternate Transducers and Mounting Methods Portable MountingTrolling Motor Mounting Thru-Hull Mounting Beginning Installation Transducer ExchangeTransom Installation Step One Determine Where to Mount the TransducerStep Two Drill the Mounting Holes Step Three Assemble the TransducerConfirm the pivot angle has not changed Step Five Adjust the Running Position of the TransducerStep Four Mount the Transducer to the Transom Step Six Route the Cable Step Two Test the Mounting Location Inside the Hull InstallationStep One Determine the Mounting Location Page Step Three Permanently Mount the Transducer Step Two Connect the Power Cable to the Boat Control Head InstallationStep One Determine Where to Mount Page Step Three Drill the Mounting Holes Step Four Run the CablesPage Step Five Assembling the Connector Holder Your Humminbird is now ready for operationTest the Installation Testing the Installation Using the Wide Portrait Simulator OperationFeature Memory Interpreting the ON-SCREEN Information Page Page Control Functions Page Sensitivity Depth Range Page Zoom Depth Alarm Fish Alarm Triplog Page Page Page Page Using Diagnostic Customizing SET-UP FunctionsPage Using Alternative Transducers Specifications

Wide Portrait specifications

The Humminbird Wide Portrait stands out in the realm of fish finders and chart plotters, designed with both professional anglers and casual fishermen in mind. Its innovative features and cutting-edge technologies make it a staple for anyone serious about their time on the water.

One of the defining characteristics of the Humminbird Wide Portrait is its expansive display. With a large screen that is oriented in portrait mode, users benefit from increased vertical viewing space, which enhances visibility of underwater structures, fish, and waypoints. The display employs high-resolution color graphics, ensuring clarity even in bright sunlight. The intuitive interface allows for easy navigation through menus, making it accessible for users of all skill levels.

At the heart of the Humminbird Wide Portrait is its advanced sonar technology. With features like DualBeam Plus sonar and SwitchFire, users can explore underwater environments with precision. DualBeam Plus employs two sonar beams, allowing for detailed imaging at varying depths and providing a more comprehensive view of the underwater landscape. SwitchFire technology enhances this experience by enabling users to toggle between different display modes, tailoring the view to their specific needs.

Notably, the Humminbird Wide Portrait integrates GPS capabilities, offering built-in cartography and the ability to create customized maps. This feature proves invaluable for planning fishing trips, as users can mark hotspots, track their movements, and quickly return to favorite locations. The unit also supports the Humminbird LakeMaster and Navionics mapping options, further expanding its navigational capabilities.

User-friendly features like the ability to set up split-screen views enhance the functionality of the Humminbird Wide Portrait. Anglers can simultaneously monitor sonar readings alongside GPS data, providing a comprehensive picture of both location and fish activity. Additionally, the device's rugged design ensures it can withstand the harsh conditions often encountered while fishing.

In conclusion, the Humminbird Wide Portrait is a game-changer for anglers who value technology and functionality in a compact package. With its advanced sonar capabilities, expansive display, integrated GPS, and user-friendly features, it remains an essential tool for maximizing time on the water and enhancing the fishing experience. Whether you're a seasoned pro or just starting, the Humminbird Wide Portrait empowers you to fish smarter and with greater confidence.
Top Page Image Contents