Humminbird LCR120 manual

Page 16

www..reelschel matic..com

fuse in the connection. If you must wire the control head directly to a battery, be sure to install an inline fuse holder

Image 16

Contents Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Alternate Transducers and Mounting Methods Portable MountingTrolling Motor Mounting Thru-Hull MountingBeginning Installation Transducer ExchangeTransom Installation Step One Determine Where to Mount the TransducerStep Two Drill the Mounting Holes Step Three Assemble the TransducerPage Step Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Page Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Three Drill the Mounting Holes Step Four Run the CablesPage Step Five Assembling the Connector Holder Your Humminbird is now ready for operationTest the Installation Testing the Installation Mounting the LCRUsing the LCR Using the Built-In SimulatorLCR 120 Functions LCR 120 FunctionsFactory Setting Fish symbols Units SensitivityBottom Alarm Fish AlarmZoom Bottom Lock Using Bottom Lock Factory Setting Off Display Speed Setting Display Speed Depth Range Setting Depth RangeTrip Log