Humminbird LCR120 manual Units, Sensitivity

Page 25

www..reelschel matic..com

Units

2.Selecting Units;

Factory Setting: MPH/SM

The LCR 120 has no provision for speed and water temperature accessories. Because of this, the UNITS menu has no effect on the operation of the unit.

Sensitivity

3.Selecting Sensitivity;

Factory Setting: +0

The LCR 120 automatically adjusts to the proper amount of sensitivity for conditions (i.e. depth). You can bias the setting + or –5 levels to suit your personal taste. Increasing the sensitivity targets and the thermoclines, which might not be displayed at the +0 setting.

If you want to manually adjust Sensitivity, select SENS and press the Up or Down arrow button to adjust the display.

Image 25

Contents Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Portable Mounting Alternate Transducers and Mounting MethodsTrolling Motor Mounting Thru-Hull MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesPage Step Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Page Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Mounting the LCR Testing the InstallationUsing the Built-In Simulator Using the LCRLCR 120 Functions LCR 120 FunctionsFactory Setting Fish symbols Sensitivity UnitsFish Alarm Bottom AlarmZoom Bottom Lock Using Bottom Lock Factory Setting Off Depth Range Setting Depth Range Display Speed Setting Display SpeedTrip Log