Humminbird LCR120 manual

Page 13

www..reelschel matic..com

The transducer cannot transmit through air. The water purges any air from between the transducer and the hull and fills any voids in the coarse fiberglass surface.

Image 13

Contents Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Portable Mounting Alternate Transducers and Mounting MethodsTrolling Motor Mounting Thru-Hull MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesPage Step Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Page Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Mounting the LCR Testing the InstallationUsing the Built-In Simulator Using the LCRLCR 120 Functions LCR 120 FunctionsFactory Setting Fish symbols Sensitivity UnitsFish Alarm Bottom AlarmZoom Bottom Lock Using Bottom Lock Factory Setting Off Depth Range Setting Depth Range Display Speed Setting Display SpeedTrip Log