Humminbird AS GR4 manual Setup Menu Tab, Arrival Alarm, Drift Alarm

Page 18

Off Course Limits

Arrival Alarm Circle

To change the Off Course Alarm setting:

1.Highlight Off Course Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = 300 ft, 100 m)

Setup Menu Tab

From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the unit.

The following menu choices will be added to your Setup Menu Tab when a Handheld GPS is connected to the Matrix Fishing System:

Arrival Alarm

Arrival Alarm sounds when the boat has either exceeded the distance to the destination waypoint, or has entered the Arrival Alarm Circle, based on the menu setting when navigating. Arrival Alarm allows you to set how close the boat must be to the destination waypoint before the Arrival Alarm will sound.

To change the Arrival Alarm setting:

1.Highlight Arrival Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = 150 ft, 50 m)

Drift Alarm

Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the size of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter, the Drift Alarm will sound.

•Units - Distance

•Units - Speed

•Triplog Reset

•Local Time Zone (Advanced)

•Daylight Savings Time (Advanced)

•Position Format (Advanced)

•Time Format (Advanced, International Only)

•Date Format (Advanced, International Only)

•NMEA Format.

See your Matrix Fishing System Operations Manual for information on the standard Setup Menu choices

Drift Alarm Circle

To change the Drift Alarm setting:

1.Highlight Drift Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = Off)

Setup Menu Tab

Drift Alarm Perimeter

30

31

Page 17 Page 19
Image 18
Page 17 Page 19
Contents GR4 GPS Receiver Accessory Manual Table of Contents Thank YouGR4 GPS Connection Kit How GPS WorksNo access under mounting location Connecting a GR4 GPS Receiver to the MatrixAccess under mounting location If you have… Then useAccess Under Mounting Location Stem Mount with 1 14 ThreadFollow these steps to stem mount the GPS receiver Bird’s Eye View No Access Under Mounting LocationViews Finish Routing the Cable and Check OperationView Orientation Track ViewCombo View Combo ViewSave, Edit, or Delete a Waypoint Introduction to NavigationWaypoints, Routes and Tracks Waypoints, Routes and TracksSave or Clear a Current Track Navigate to a Waypoint or PositionAdd a Waypoint Target or Trolling Grid Track View with GridEdit, Delete or Hide Saved Tracks Menu SystemStart-Up Options Menu Normal OperationSystem Status Self Test Accessory TestSimulator With PC Connect Cable OnlyNavigation X-PressTMMenu Sonar X-PressTMMenuMark ZoomSave Current Track Cancel NavigationGo To Clear Current TrackNavigation Menu Tab Remove GridSonar Window TracksGrid Rotation WaypointsNorth Reference Trackpoint IntervalTrack Min Distance Alarms Menu Tab Map DatumOff Course Alarm Delete All Nav DataSetup Menu Tab Arrival AlarmDrift Alarm Units Speed Triplog ResetUnits Distance Local Time ZoneDate Format Position FormatTime Format Nmea OutputFishing System Doesn’t Power Up TroubleshootingDisplay Problems ProblemPossible Source of Noise Isolation Other electronic devices Matrix Fishing System AccessoriesFinding the Cause of Noise Boat’s engineContact Humminbird
Top Page Image Contents