Humminbird AS GR4 manual Go To, Save Current Track, Clear Current Track, Skip Next Waypoint

Page 14

Go To

Go To allows you to start Navigation towards a waypoint. If the Cursor is active, choosing Go To creates a waypoint and starts navigation towards that waypoint; if the Cursor is not active, choosing Go To displays the list of waypoints, so that you can select the waypoint towards which you want to navigate.

To Begin Navigation:

1.Highlight Go To on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to begin navigation. Navigation will begin immediately if the Cursor is active or the Waypoint selection list will appear. Select a waypoint and navigation will begin immediately.

Save Current Track

Save Current Track allows you to save the current track being displayed. After the current track is saved, a new current track is started.

To Save Current Track:

1.Highlight Save Current Track on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate saving the current track.

3.The Confirm dialog box will appear. To save the current track, press the RIGHT Cursor key once more. To cancel saving the current track, press the LEFT Cursor key.

Clear Current Track

Clear Current Track allows you to clear the current track being displayed and start a new track at the present position.

To Clear Current Track:

1.Highlight Clear Current Track on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate clearing the current track.

3.The Confirm dialog box will appear. To clear the current track, press the RIGHT Cursor key once more. To cancel clearing the current track, press the LEFT Cursor key.

Skip Next Waypoint

(Only When Navigating)

Skip Next Waypoint removes the next waypoint from the current route. This menu choice will only appear when you are currently navigating a route.

To Skip Next Waypoint:

1.Highlight Skip Next Waypoint on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next waypoint.

3.The Confirm dialog box will appear. To skip the next waypoint, press the RIGHT Cursor key once more. To cancel skipping the next waypoint, press the LEFT Cursor key.

Cancel Navigation

(Only When Navigating)

Cancel Navigation discards the current route and exits Navigation Mode. This menu choice will only appear when you are currently navigating a route.

To Cancel Navigation:

1.Highlight Cancel Navigation on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate canceling navigation.

3.The Confirm dialog box will appear. To cancel navigation, press the RIGHT Cursor key once more. To avoid canceling navigation, press the LEFT Cursor key.

4.The Save Current Route dialog box will appear. Use the RIGHT 4-WAY Cursor key to save the route or the LEFT 4-WAY Cursor key to decline saving the route.

Remove Target

(Only if a Target is Active)

Remove Target removes the waypoint target from the display. This menu choice will only appear when a target has already been applied to a waypoint.

To Remove a Target:

1.Highlight Remove Target on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to remove the target.

22

23

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GR4 GPS Receiver Accessory Manual Table of Contents Thank YouGR4 GPS Connection Kit How GPS WorksNo access under mounting location Connecting a GR4 GPS Receiver to the MatrixAccess under mounting location If you have… Then useFollow these steps to stem mount the GPS receiver Access Under Mounting LocationStem Mount with 1 14 Thread Bird’s Eye View No Access Under Mounting LocationViews Finish Routing the Cable and Check OperationView Orientation Track ViewCombo View Combo ViewSave, Edit, or Delete a Waypoint Introduction to NavigationWaypoints, Routes and Tracks Waypoints, Routes and TracksSave or Clear a Current Track Navigate to a Waypoint or PositionAdd a Waypoint Target or Trolling Grid Track View with GridEdit, Delete or Hide Saved Tracks Menu SystemStart-Up Options Menu Normal OperationSystem Status Self Test Accessory TestSimulator With PC Connect Cable OnlyNavigation X-PressTMMenu Sonar X-PressTMMenuMark ZoomSave Current Track Cancel NavigationGo To Clear Current TrackNavigation Menu Tab Remove GridSonar Window TracksGrid Rotation WaypointsNorth Reference Trackpoint IntervalTrack Min Distance Alarms Menu Tab Map DatumOff Course Alarm Delete All Nav DataDrift Alarm Setup Menu TabArrival Alarm Units Speed Triplog ResetUnits Distance Local Time ZoneDate Format Position FormatTime Format Nmea OutputFishing System Doesn’t Power Up TroubleshootingDisplay Problems ProblemPossible Source of Noise Isolation Other electronic devices Matrix Fishing System AccessoriesFinding the Cause of Noise Boat’s engineContact Humminbird
Top Page Image Contents