Humminbird AS GR4 manual Remove Grid, Sonar Window, Navigation Menu Tab, Tracks

Page 15

Remove Grid

(Only if a Grid is Active)

Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint.

To Remove a Grid:

1.Highlight Remove Grid on the Navigation X-PressTMmenu.

2.Use the RIGHT 4-WAY Cursor Control key to remove the grid.

Sonar Window

(Combo View Only)

Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be accessed from the Combo View.

To Set the Size of the Sonar Window in the Combo View:

1.Highlight Sonar Window on the Navigation X-PressTMmenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window. (Wide, Medium, Narrow, Default = Medium)

Navigation Menu Tab

Press the MENU key twice to access the Main Menu System, then press the RIGHT cursor key to select the Navigation tab.

NOTE: Menu choices will vary depending on system settings.

The Navigation Menu Tab will be added to the menu system when a Handheld GPS is connected to the Matrix Fishing System, and the following menu choices will appear in the menu tab:

•Tracks

•Waypoints

•View Orientation

•NorthReference

•Grid Rotation

•Trackpoint Interval

•Track Min Distance (Advanced)

•Map Datum (Advanced)

•Delete All Nav Data (Advanced).

Tracks

Tracks allows you to view the Tracks submenu.

To view the Tracks Submenu:

1.Highlight Tracks on the Navigation main menu.

2.Use the RIGHT 4-WAY Cursor Control keys to view the Tracks submenu.

Tracks Submenu

The Tracks Submenu contains the following menu choices:

Edit allows you to select a previously-saved track and edit its name.

Delete allows you to delete a track from a list of previously-saved tracks.

Visibility allows you to display or hide each saved track.

24

25

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GR4 GPS Receiver Accessory Manual Thank You Table of ContentsHow GPS Works GR4 GPS Connection KitIf you have… Then use Connecting a GR4 GPS Receiver to the MatrixAccess under mounting location No access under mounting locationAccess Under Mounting Location Stem Mount with 1 14 ThreadFollow these steps to stem mount the GPS receiver Finish Routing the Cable and Check Operation No Access Under Mounting LocationViews Bird’s Eye ViewCombo View Track ViewCombo View View OrientationWaypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a WaypointTrack View with Grid Navigate to a Waypoint or PositionAdd a Waypoint Target or Trolling Grid Save or Clear a Current TrackMenu System Edit, Delete or Hide Saved TracksNormal Operation Start-Up Options MenuWith PC Connect Cable Only Self Test Accessory TestSimulator System StatusZoom Sonar X-PressTMMenuMark Navigation X-PressTMMenuClear Current Track Cancel NavigationGo To Save Current TrackTracks Remove GridSonar Window Navigation Menu TabTrackpoint Interval WaypointsNorth Reference Grid RotationDelete All Nav Data Alarms Menu Tab Map DatumOff Course Alarm Track Min DistanceSetup Menu Tab Arrival AlarmDrift Alarm Local Time Zone Triplog ResetUnits Distance Units SpeedNmea Output Position FormatTime Format Date FormatProblem TroubleshootingDisplay Problems Fishing System Doesn’t Power UpBoat’s engine Matrix Fishing System AccessoriesFinding the Cause of Noise Possible Source of Noise Isolation Other electronic devicesContact Humminbird
Top Page Image Contents