Humminbird 955C manual 531569-1B 955c ManE.qxp 3/4/2007 503 PM

Page 14

531569-1_B - 955c ManE.qxp 3/4/2007 5:03 PM Page 8

1Power

2Temp/Speed

3Communications

4Cable Collector Insert

5

1 2 3

4

Plug Cable Connector Assembly to

Back of Control Head

10.While holding cables in place in the cable collector insert, thread the cables through the slot in the bottom of the cable collector cover, line up the cable collector insert and cover, then slide the cover into place on the insert.

NOTE: The tab on the Cable Collector insert goes into the slot on the cover.

1

3

2

4

5

1 Cable Collector Insert

2 Screws

3 Cable Collector Cover

4 Tab on Insert

5 Slot on Cover

10.Attach the cable collector insert to the cable collector cover using the 2 Phillips screws provided.

11.Place the control head back onto the mounting bracket. Plug in the cable collector assembly to the back of the control head. Cable connectors and cable sockets are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong sockets. Once the cable collector and all cables are plugged into the back of the control head, lock the assembly into place by threading the knurled screw into the threaded insert on the back of the housing. Adjust the control head to the desired viewing angle and secure by tightening the gimbal knobs.

NOTE: You may wish to dress the cabling with nylon wire ties in order to hold the cables together and create a cleaner assembly.

The Humminbird® 900 Series™ control head is now ready for operation.

8

Image 14

Contents 531569-1B 955c ManE.qxp 3/4/2007 503 PM Thank You Table of Contents Menu System Start-Up Options Menu Navigation Menu Tab Views Menu Tab Accessories Menu Tab Series Introduction How GPS and Cartography WorkSoftware Updates Multi-Media Card MMC/SD SlotAccessory Bus Installation OverviewGimbal Mounting the Control Head Control Head InstallationBasic installation tasks that you must perform include 531569-1B 955c ManE.qxp 3/4/2007 503 PM Mounting Screws 531569-1B 955c ManE.qxp 3/4/2007 503 PM 531569-1B 955c ManE.qxp 3/4/2007 503 PM Connecting the Control Head Power Cable to the Boat Follow these steps to stem mount the GPS receiver GPS Receiver InstallationStem Mounting with an Existing 1 14 Thread Stem Access Under Mounting Location No Access Under Mounting Location Finish Routing the Cable Check GPS Receiver OperationTesting the System Installation To test the installationGetting Started Using Your 900 Series Powering Up the Control HeadWhat’s On the Display CartographyView Key POWER/LIGHT KeyKey Functions WAY Cursor Control Key View Preset KeysMenu Key Mark Key Exit KeyInfo Key Goto KeyViews available on your 900 Series are ViewsZoom +/- Keys SecondsBirds Eye Instrument View Chart ViewViews and Readouts Birds Eye Big Digits ViewBirds Eye Instrument View Bird’s Eye Big Digits View Chart/Bird’s Eye Combo View Traveling measured in degrees from NorthChart/Chart Combo View Chart No Readouts View Chart View VoltageCursor Icon Boat Icon Chart Big Digits View Chart Instrument View Cartography Boat Icon RouteScreen Snapshot View Information Box531569-1B 955c ManE.qxp 3/4/2007 503 PM Chart Orientation Viewing CartographyIntroduction to Navigation Waypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling GridSave, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved TracksMan Overboard MOB Navigation Menu System Start-Up Options Menu Normal Simulator System Status Normal OperationSimulator Self Test Accessory TestSystem Status GPS Diagnostic View Split Position Navigation X-Press MenuActive Side Waypoint Name Cursor to WaypointClear Current Track Save Current TrackSave Current Route Skip Next WaypointTo Cancel MOB Navigation Cancel NavigationCancel MOB Navigation Remove TargetMost recently-created waypoint Select Readouts COG VMG Select Nav Readouts Only on views with 5 selectable readoutsSelectable Data Windows Default Chart View Customized Chart View Delete All Images Screen Snapshot Press MenuDelete Image To delete an imageNavigation Menu Tab Current TrackWaypoints Submenu contains the following menu choices Saved TracksWaypoints Routes Trackpoint Interval Trolling Grid RotationNorth Reference North Reference allows you to have bearingsMap Datum Track Min DistanceTrack Color Range Export All Nav Data Continuous Navigation ModeCourse Projection Line Delete All Nav DataChart Menu Tab Chart Detail LevelSpot Soundings Map BordersLat/Lon Grid Set Simulation Position Navaids on Birds Eye ViewShaded Depth Set Map Offset Clear Map OffsetAlarms Menu Tab Low Battery AlarmAux. Temp. Alarm Temp. AlarmOff Course Alarm Arrival AlarmDrift Alarm Alarm ToneUnits Temp Setup Menu TabUnits Depth Units Speed User ModeUnits Distance LanguageAux. Temp.Offset Triplog ResetRestore Defaults Temp. OffsetDaylight Saving Time Speed CalibrationLocal Time Zone Position FormatDigits Format Time FormatDate Format Nmea Output DemonstrationViews Menu Tab Following views are availableAccessories Menu Tab Using Screen Snapshot531569-1B 955c ManE.qxp 3/4/2007 504 PM Troubleshooting Display Problems Chartplotter Doesn’t Power UpFinding the Cause of Noise Year Limited WarrantyAway from the engine wiring Humminbird Service Policy Returning Your Unit for Service Series Chartplotter Accessories Series includeSpecifications Glossary GPS & Navigation TermsGlossary Glossary Glossary Contact Humminbird