Humminbird 585C manual Sonar X-Press Menu, To adjust the Sensitivity

Page 12

FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 22

Sonar X-Press™ Menu

The Sonar X-Press™ menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-Press™ menu.

NOTE: Upper Range only appears in Advanced User Mode when in Sonar or Big Digits View.

NOTE: Zoom Level only appears in Sonar Zoom View.

Sonar X-Press™ Menu

Sensitivity

Sensitivity controls how much detail is shown on the display. Increasing the sensitivity shows more sonar returns from small baitfish and suspended debris in the water; however, the display may become too cluttered. When operating in very clear water or greater depths, increased sensitivity shows weaker returns that may be of interest. Decreasing the sensitivity eliminates the clutter from the display that is sometimes present in murky or muddy water. If Sensitivity is adjusted too low, the display may not show many sonar returns that could be fish.

Sensitivity at Low

Sensitivity at Medium

Sensitivity at High

To adjust the Sensitivity:

1.Highlight Sensitivity on the Sonar X-Press™ menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to increase or decrease the Sensitivity setting. (Low = 1, High = 20, Default = 10)

16

17

Page 11 Page 13
Image 12
Page 11 Page 13
Contents FishFinder 585c Operations Manual Thank You Table of Contents Troubleshooting How Sonar WorksSingle Beam Sonar 200 kHz, Orange Fish Symbol What’s On the DisplayHigh Sonar Intensity Return Bait Ball RTS Real Time Sonar WindowViews Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowSonar Zoom View Big Digits ViewPOWER/LIGHT Key Bottom PresentationKey Functions View KeyPowering Up the Unit Menu KeyWay Cursor Control Key Exit KeyExit Normal operation by powering your FishFinder off Start-Up Options MenuNormal Operation Exit the Simulator by powering your FishFinder off SimulatorSystem Status To adjust the Sensitivity Sonar X-Press MenuSensitivity Highlight Sensitivity on the Sonar X-Press menuChart Speed Upper RangeLower Range Bottom ViewTo adjust the Zoom Level Zoom LevelSonar Menu Tab Highlight Zoom Level on the Sonar X-Press menuTo change the Fish Sensitivity setting To change the RTS Window settingFish ID+ Fish SensitivityTo change the Depth Lines setting To change the Surface Clutter settingDepth Lines Surface ClutterNoise Filter Max DepthWater Type Alarms Menu Tab Depth AlarmFish ID Alarm To change the Depth Alarm settingLow Battery Alarm Temp AlarmAlarm Tone Setup Menu TabUser Mode Units DepthUnits Temp Units DistanceTriplog Reset Restore DefaultsSelect Views Select Readouts Depth OffsetTemp Offset Speed CalibrationTroubleshooting Display ProblemsProblem Possible Cause Humminbird Fishfinder Accessories SpecificationsFinding the Cause of Noise Contact Humminbird
Top Page Image Contents