Humminbird 585C manual Surface Clutter, To change the Depth Lines setting, Advanced

Page 16

FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 30

Depth Lines

(Advanced)

Depth Lines divide the display into four equal sections which are separated by three horizontal depth lines. The depth of each line is displayed along the depth scale. You can either turn Depth Lines On or Off. The Depth Lines menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

Depth

Lines

Surface Clutter

(Advanced)

Surface Clutter adjusts the filter that removes surface clutter noise caused by algae and aeration. The lower the setting, the less surface clutter will be displayed. The Surface Clutter menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).

NOTE: If the Surface Clutter menu is set to lower than 5, it will also decrease the displayed signal strength of targets (fish) close to the surface.

Surface

Clutter

To change the Depth Lines setting:

1.Make sure you are in Advanced User Mode, then highlight Depth Lines on the Sonar main menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to turn the Depth Lines setting On or Off. (Off, On, Default = Off)

To change the Surface Clutter setting:

1.Make sure you are in Advanced User Mode, then highlight Surface Clutter on the Sonar main menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Surface Clutter setting. (Low = 1 to High = 10, Default = 5)

24

25

Page 15 Page 17
Image 16
Page 15 Page 17
Contents FishFinder 585c Operations Manual Thank You Table of Contents How Sonar Works TroubleshootingSingle Beam Sonar 200 kHz, Orange Fish Symbol What’s On the DisplayHigh Sonar Intensity Return Bait Ball RTS Real Time Sonar WindowViews Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowSonar Zoom View Big Digits ViewPOWER/LIGHT Key Bottom PresentationKey Functions View KeyPowering Up the Unit Menu KeyWay Cursor Control Key Exit KeyStart-Up Options Menu Exit Normal operation by powering your FishFinder offNormal Operation Simulator Exit the Simulator by powering your FishFinder offSystem Status To adjust the Sensitivity Sonar X-Press MenuSensitivity Highlight Sensitivity on the Sonar X-Press menuChart Speed Upper RangeLower Range Bottom ViewTo adjust the Zoom Level Zoom LevelSonar Menu Tab Highlight Zoom Level on the Sonar X-Press menuTo change the Fish Sensitivity setting To change the RTS Window settingFish ID+ Fish SensitivityTo change the Depth Lines setting To change the Surface Clutter settingDepth Lines Surface ClutterMax Depth Noise FilterWater Type Alarms Menu Tab Depth AlarmFish ID Alarm To change the Depth Alarm settingLow Battery Alarm Temp AlarmAlarm Tone Setup Menu TabUser Mode Units DepthUnits Temp Units DistanceRestore Defaults Triplog ResetSelect Views Select Readouts Depth OffsetTemp Offset Speed CalibrationDisplay Problems TroubleshootingProblem Possible Cause Specifications Humminbird Fishfinder AccessoriesFinding the Cause of Noise Contact Humminbird
Top Page Image Contents