Humminbird 585C manual Alarms Menu Tab, Fish ID Alarm, To change the Depth Alarm setting

Page 18

FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 34

Alarms Menu Tab

From any view, press the MENU key twice to access the Main Menu System. The Alarms tab will be the default selection.

NOTE: When an alarm is triggered, you can silence it by pressing any key. The alarm will be silenced, and will not be triggered again until you enter a new instance of the alarm condition.

Alarms Menu

Depth Alarm

Depth Alarm sounds when the depth becomes equal to or less than the menu setting.

To change the Depth Alarm setting:

1.Highlight Depth Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 5 to 30 meters [International Models Only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the FishFinder detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+™ is on.

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1.Highlight Fish ID Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

All

Large/Medium

Large

28

29

Image 18

Contents FishFinder 585c Operations Manual Thank You Table of Contents Troubleshooting How Sonar WorksSingle Beam Sonar High Sonar Intensity Return Bait Ball 200 kHz, Orange Fish SymbolWhat’s On the Display RTS Real Time Sonar WindowUnderstanding Sonar History ViewsSonar View Real Time Sonar RTS WindowSonar Zoom View Big Digits ViewKey Functions POWER/LIGHT KeyBottom Presentation View KeyWay Cursor Control Key Powering Up the UnitMenu Key Exit KeyExit Normal operation by powering your FishFinder off Start-Up Options MenuNormal Operation Exit the Simulator by powering your FishFinder off SimulatorSystem Status Sensitivity To adjust the SensitivitySonar X-Press Menu Highlight Sensitivity on the Sonar X-Press menuLower Range Chart SpeedUpper Range Bottom ViewSonar Menu Tab To adjust the Zoom LevelZoom Level Highlight Zoom Level on the Sonar X-Press menuFish ID+ To change the Fish Sensitivity settingTo change the RTS Window setting Fish SensitivityDepth Lines To change the Depth Lines settingTo change the Surface Clutter setting Surface ClutterNoise Filter Max DepthWater Type Fish ID Alarm Alarms Menu TabDepth Alarm To change the Depth Alarm settingAlarm Tone Low Battery AlarmTemp Alarm Setup Menu TabUnits Temp User ModeUnits Depth Units DistanceTriplog Reset Restore DefaultsSelect Views Temp Offset Select ReadoutsDepth Offset Speed CalibrationTroubleshooting Display ProblemsProblem Possible Cause Humminbird Fishfinder Accessories SpecificationsFinding the Cause of Noise Contact Humminbird